Bedienungsanleitung Trekstor Luna S2 PVR (Seite 24 von 34) (Deutsch, Englisch)

485451

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

e) Inside this menu please choose the desired satellite by pressing the L or K button and

mark your choice by using the k button. In most cases that is the Satellit Astra 1H on the

position 19.2° E (storage location 002 inside the default satellite list). Below the channel

list you can find a bargraph, on which the "QuALity" of the current signal is displayed.

In case you would like to change the settings, which are displayed within the right half of

the menu, press the M button and carry out the desired change. The settings concerning

the satellite system are saved by pressing the D button.

f) Please press the blue button of the remote control. A window with the title "

StAtioN SeArch"

appears and you can carry out further settings. But usually no more settings have to be

adjusted here.

g) Start the station scan on the marked satellite with a new push on the blue button. It

appears the request "

DeLete ALL chANNeLS oF the choSeN SAteLLite?". If you would like to keep

the default channel list, which contains the most popular channels of the German TV,

press the D button. The new channels will then be attached to the default channel list.

In case you would like to overwrite the default channel list, please press the k button.

While the channel search is running, you will be informed about the progress of the

search and about all found TV and radio channels.

h) After having completed the channel search, the channel list will be stored automatically and

the SatReceiver starts to playback. You can now edit the channel list by e. g. creating a favorite

list. You will find an instruction for that under the section "

eDitiNg the chANNeL AND FAvorite LiSt".

4) Operating the TrekStor HD SatReceiver Lunda S2

4.1) General operation

Turning the SatReceiver on/off

In case the SatReceiver is connected to the power supply, you can shift to the standby mode

by pressing the a button on your remote control.

In order to switch the SatReceiver completely off, you must disconnect it from the power

supply.

Adjusting the volume

You can raise or lower the volume by pressing the M or N button.

If you keep the M or N button pressed, the volume changes constantly.

In case you are pressing the b button, you can switch off the volume completely (mute) as

well as loud again.

Changing channels

There are several possibilities to change a channel:

• With the numerical keys (0 until 9) of your remote control you can insert the number

of the desired channel. If, for example, you would like to choose the channel number 23,

then press consecutively the keys 2 and 3 and wait until the channel was changed. As a

check the inserted numbers are displayed onto a small information field on the screen.

• With the K or L button of the remote control you can switch to the next respective the

previous channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trekstor Luna S2 PVR Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info