Bedienungsanleitung Trekstor neptune (Seite 46 von 60) (Deutsch, Englisch)

485457

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

– 46 –

– 47 –

4.8 Standby Mode

If you are not using your SatCorder, you can reduce the power consumption by placing it in standby mode.

Standby mode lets you reactivate it quickly. In standby mode, a display of the current time appears on the

display of your SatCorder. Programmed recordings are carried out when the SatCorder is in standby mode.

Please note: To switch off the SatCorder completely and prevent unnecessary power consumption, please

turn off your SatCorder using the mains switch on the back side. Please observe that no programmed recordings

can be carried out while the mains switch is set to "

o F F ".

4.9 Recording and Playback of Programs

Connecting a USB 2.0 Mass Storage Device

Your SatCorder has a USB 2.0 port on the back side. You can connect an external USB 2.0 hard disk

(e.g. a TrekStor DataStation) or a USB stick.

If you connect a suitable USB 2.0 mass storage device, a message appears during the initialization of the

storage device and once it has been successfully recognized. With a connected external USB 2.0 hard

disk, you can use the versatile recording and playback functions of your SatCorder optimally. For this

reason, the following assumes that an external USB 2.0 hard disk is being used for recordings.

Please note: The file system of the external USB 2.0 hard disk must be FAT32.

Please note: Please always unmount your USB 2.0 mass storage device prior to removing it. This is done by

pressing the yellow function key on your remote control.

Time Shift

If you want to interrupt a television program in progress, just press the Q key on your remote control.

The SatCorder immediately starts to record the program in progress on the connected USB 2.0 hard disk.

A freeze frame of the moment in which you interrupted the program and the time shift counter appear

on the screen. To continue the playback at the position at which you stopped, press the Q key again.

Instant Replay

If you press the V key of the remote control, the last 30 seconds of the playback of a time shift

recording in progress is repeated. If you activate the "i

n S t a n t re p l a y " function in the "pVr Se t t i n g S " menu,

the V key also works during the normal playback of the television program as soon as the selected

channel has been running for at least 30 seconds.

Record

With your SatCorder, you can record the current program as well as programming timed recordings

by pressing the O key.

If you want to record the current program, you have two possibilities:

Endless recording: Start the recording by pressing the • O key on the remote control. To stop the

recording, press the P key.

Recording with automatic ending: When the information display is visible, the end time of the •

current program is set according to the data given in the EPG.

If you want to plan your recordings in advance, you can use the EPG or Personal Planner for this purpose.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trekstor neptune Seite 46

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info