Bedienungsanleitung Trendnet TEW-692GR (Seite 42 von 55) (Englisch)

730203

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

TRENDnet User’s Guide

TEW-692GR

Identify your network on the Internet

Administrator > Management

Since most ISPs constantly change your home IP address, providing access to devices on

your home or small office Local Area Network (such as IP Cameras) from the Internet

requires setting up a Dynamic DNS service and entering the parameters into this

management area. Dynamic DNS services allow your router to confirm its location to the

given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability

to provide a virtual fixed IP address for your network. This means that even though your

ISP is always changing your IP address, the Dynamic DNS service will be able to identify

your network using a fixed address—one that can be used to view home IP Camera and

other devices on your local area network.

Note: First, you will need to sign up for one of the DDNS service providers listed in

the Server Address drop-down list.

1. Sign up for one of the DDNS available service providers list under Server Address.

(e.g. dyndns.com, etc.)

2. Log into your router management page (see “

Access your router management page”

on page 26).

3. Click on Administrator and click on Management.

4. In the Dynamic DNS Provider drop-down list, select the provider you selected, and

enter your information in the fields.

• Host Name: Personal URL provided to you by your Dynamic DNS service provider

(e.g. www.trendnet.dyndns.biz)

• User Name: The user name needed to log in to your Dynamic DNS service account

• Password: This is the password to gain access to Dynamic DNS service (NOT your

router or wireless network password) for which you have signed up to.

5. To save changes, click Apply.

Allow remote access to your router

Management > Remote Management

You may want to make changes to your router from a remote location such at your

office or another location while away from your home.

1. Log into your router management page (see “

Access your router management page”

on page 26).

2. Click on Administrator, and click on Management.

3. On the Remote Management section, select Enabled in the Remote Control setting.

• Port: It is recommended to leave this setting as 8080.

Note: If you have configured port 8080 for another configuration section such

as virtual server or special application, please change the port to use.

(Recommended port range 1024-65534)

4. To save changes, click Apply.

Router Maintenance & Monitoring

Reset your router to factory defaults

Administrator > Settings Management

You may want to reset your router to factory defaults if you are encountering difficulties

with your router and have attempted all other troubleshooting. Before you reset your

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-692GR Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-692GR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info