Bedienungsanleitung Trendnet TEW-716BRG (Seite 18 von 43) (Englisch)

541686

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

TRENDnet User’s Guide

TEW-716BRG

• Destination IP : Ports – Enter the destination IP address of the computer/device

located on the Internet and port number to apply the filter. To specify all port

numbers, do not specify any value for Ports field. For specific port numbers, enter

a port number or range within the range of 1-65535 (e.g. 21 or 21-30) in the Ports

field.

Note: Typically, you can specify 0.0.0.0 for any destination IP address located on

the Internet or enter the specific IP address. (e.g. 10.10.10.200)

• Protocol – Select the protocol type to filter. TCP, UDP, or you can select Both to

choose both protocol types.

• Enable – Check the option to enable the filter.

• Use rule# - Click the drop-down list to select a pre-defined schedule. The filter

will only be active during the time period defined in the pre-defined schedule.

Note: Before applying scheduling, please ensure your Time settings are configured

correct and you have defined a schedule. See page 51 to configure Time Settings

and see page 65 to create a schedule.

To save changes, click Save at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Clicking MAC Level will bring you to the MAC Control configuration page. See MAC

Control section.

Inbound Packet Filter

You may want apply inbound packet filters to allow or deny access of specific traffic

from the Internet to computers or devices on your local network.

To configure inbound packet filters:

Click Inbound Filter at the bottom of the outbound packet filter page.

Next to Inbound Packet Filter, check the Enable option to enable inbound filtering.

• Select Allow all to pass except those match the following rules to allow all traffic

and deny only the filters specified in the list.

• Select Deny all to pass except those match the following rules to deny all traffic

and allow only the filter specified in the list.

Review the inbound packet filter settings.

• Source IP – Enter the source IP address or computer/device IP address on your

located on the Internet to apply the filter. (e.g. 192.168.10.101)

Note: Typically, you can specify 0.0.0.0 for any source IP address located on the

Internet or enter the specific IP address. (e.g. 10.10.10.200)

• Destination IP : Ports – Enter the destination IP address of the computer/device

located on your local network and port number to apply the filter. To specify all

port numbers, do not specify any value for Ports field. For specific port numbers,

enter a port number or range within the range of 1-65535 (e.g. 21 or 21-30) in the

Ports field.

• Protocol – Select the protocol type to filter. TCP, UDP, or you can select Both to

choose both protocol types.

• Enable – Check the option to enable the filter.

• Use rule# - Click the drop-down list to select a pre-defined schedule. The filter

will only be active during the time period defined in the pre-defined schedule.

Note: Before applying scheduling, please ensure your Time settings are configured

correct and you have defined a schedule. See page 51 to configure Time Settings

and see page 65 to create a schedule.

To save changes, click Save at the bottom of the page.

Note: If you would like to discard the changes, click Undo before you click Save.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-716BRG Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-716BRG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info