Bedienungsanleitung Trendnet TEW-718BRM (Seite 22 von 73) (Englisch)

541582

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

TRENDnet User’s Guide

TEW-718BRM

o B/G/N mixed – Select this mode for the best compatibility. This mode

allows older 802.11b and 802.11g wireless devices to connect to the

router in addition to newer 802.11n devices.

o B/G mixed – This mode only allows devices to connect to the router

using older and slow 802.11b or 802.11g technology and it thereby

reduces the router’s maximum speed to 54Mbps (typically not

recommended).

o N only – This mode only allows newer 802.11n devices to connect to

your router. This mode does ensure the highest speed and security for

your network, however if you have older 802.11g wireless clients, they

will no longer be able to connect to this router.

o G only – This mode only allows devices to connect to the router using

older and slow 802.11g technology (typically not recommended).

o B only – This mode only allows devices to connect to the router using

older and slow 802.11b technology (typically not recommended).

Note: Please check the specifications on your wireless devices for the highest wireless

capability supported first before applying these settings. If you are unsure, it is

recommended that you keep the default setting (B/G/N mixed) for the best

compatibility.

When applying the 802.11 mode setting, please keep in mind the following:

• Wireless devices that support 802.11n are backwards compatible and can

connect wirelessly at 802.11g or 802.11b.

• Connecting at 802.11b or 802.11g will limit the capability of your 802.11n

supported wireless devices from obtaining higher performance and data rates.

• Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless

network may degrade the wireless network performance below the higher

performance and data rates of 802.11n.

• Wireless devices that only support 802.11b or 802.11g will not be able to

connect to a wireless network that is set to 802.11n only mode.

• Wireless devices that only support 802.11b will not be able to connect to a

wireless network that is set to 802.11g only mode.

• Bandwidth – This setting only applies to wireless devices connecting at

802.11n. Another term used to describe this parameter is Channel Width.

Select the appropriate channel width for your wireless network.

o 20 MHz – This mode operates using a single 20MHz channel for

wireless devices connecting at 802.11n. This setting may provide more

stability than Auto 20/40 MHz for connectivity in busy wireless

environments where there are several wireless networks in the area.

o Auto 20 MHz/40 MHz – This mode can automatically switch between

using a single 20MHz channel or 40MHz (two 20MHz channels). When

40MHz is active, this mode is capable of providing higher performance

only if the wireless devices support the 40MHz channel width.

Enabling 20/40MHz typically results in substantial performance

increases when connecting to an 802.11n client.

• Wireless Client List – Clicking on the Wireless Client List button at the bottom

of the page will display a list of wireless clients that are currently connected to

your modem router.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-718BRM Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-718BRM

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info