Bedienungsanleitung Trendnet TEW-732BR (Seite 18 von 48) (Englisch)

541578

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TRENDnet User’s Guide

TEW-732BR

4. Interference from devices that produce RF (radio frequency) noise can also impact

your signal. Position your wireless devices away from anything that generates RF

noise, such as microwaves, radios and baby monitors.

If possible, upgrade wireless network interfaces (such as wireless cards in computers)

from older wireless standards to 802.11n. If a wirelessly networked device uses an older

standard, the performance of the entire wireless network may be slower. If you are still

experiencing low or no signal consider repositioning the wireless devices or installing

additional access points.

Advanced wireless settings

Wireless > Advanced

These settings are advanced options that can be configured to change advanced

wireless broadcast specifications. It is recommended that these settings remain set to

their default values unless you are knowledgeable about the effects of changing these

values. Changing these settings incorrectly can degrade performance.

• Beacon Interval: A beacon is a management frame used in wireless networks that

transmitted periodically to announce the presence and provide information about

the router’s wireless network. The interval is the amount time between each

beacon transmission. Default Value:100 milliseconds (range: 20-1000)

RTS Threshold: The Request To Send (RTS) function is part of the networking protocol.

A wireless device that needs to send data will send a RTS before sending the data in

question. The destination wireless device will send a response called Clear to Send

(CTS). The RTS Threshold defines the smallest data packet size allowed to initiate

the RTS/CTS function. Default Value: 2346 (range: 0-2347)

Fragmentation Threshold: Fragmentation in wireless networks is the process of

breaking down data communications into smaller data packets in order to improve

data efficiency when transferring or receiving data between wireless devices. The

fragmentation threshold defines the maximum size of the data packets that are

broken down. Default Value: 2346 (range: 256~2346, even numbers only)

• DTIM Interval: A Delivery Traffic Indication Message (DTIM) is an informational

message that is sent as part of a beacon by an access point (your wireless router) to

a wireless client (wireless device or connecting station) in sleep mode to provide an

alert that data is awaiting delivery. The DTIM Interval (also called Data Beacon Rate)

is the amount of time between DTIM transmissions included in part of a beacon.

Default Value: 1 (range: 1-255)

Access Control Filters

Access control basics

Access > Filter

MAC address filters

Access > Filter > MAC Filters

Every network device has a unique, 12-digit MAC (Media Access Control) address. Using

MAC filters, you can allow or deny specific computers and other devices from using this

router’s wired or wireless network.

1. Log into your router management page (see “

Access your router management page”

on page 21).

2. Click on Access, click on Filter, and click on MAC Filters.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-732BR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-732BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info