Bedienungsanleitung Trendnet TEW-732BR (Seite 30 von 48) (Englisch)

541578

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

TRENDnet User’s Guide

TEW-732BR

Note: The Public Port can be assigned a different port number than the Private Port

(also known as port redirection), however it is recommended to use the same port

number for both settings. Please refer to the device documentation to determine

which ports and protocols are required.

• LAN Server: Enter the IP address of the device to forward the port (e.g.

192.168.10.101).

Note: You should assign a static IP address to the device or use DHCP reservation to

ensure the IP address of the device does not change.

• Add: Saves a new virtual server entry.

• Delete: Removes an existing virtual server.

• Update: Modifies an existing virtual server.

• Cancel: Discard changes to an existing virtual server.

Example: To forward TCP port 80 to your IP camera

1. Setup DynDNS service (See DynDNS section).

2. Access TRENDnet IP Camera management page and forward Port 80 (see product

documentation)

3. Make sure to configure your network/IP camera to use a static IP address or you can

use the DHCP reservation feature (see “

Set up DHCP reservation” on page 25).

Note: You may need to reference your camera documentation on configuring a

static IP address.

4. Log into your router management page (see “

Access your router management page”

on page 21).

5. Click on Access, and click on Virtual Server.

6. In the list below, click the pre-defined virtual server entry named Virtual Server HTTP.

Note: The selected item will be highlighted in yellow when selected.

7. The fields will be populated with the selected pre-defined virtual server entry.

8. Click Enabled to turn on this virtual server.

9. Next to Name, you can enter another name for the virtual server, otherwise, leave

the default name.

10. Next to Protocol, make sure TCP is selected in the drop-down list.

11. The Private Port and Public Port, make sure port number 80 is configured for both

settings.

12. Next to LAN Server, enter the IP address assigned to the camera. (e.g.

192.168.10.101)

13. To save the changes, click Update.

Special Applications

Access > Special AP

Special applications (also called port triggering) is typically used for online gaming

applications or communication applications that require a range of ports or several

ports to be dynamically opened on request to a device on your network. The router will

wait for a request on a specific port or range of ports (or trigger port/port range) from a

device on your network and once a request is detected by your router, the router will

forward a single port or multiple ports (or incoming port/port range) to the device on

your network. This feature is not typically used as most devices and routers currently

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-732BR Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-732BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info