Bedienungsanleitung Trendnet TEW-733GR (Seite 18 von 55) (Englisch)

541581

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

TRENDnet User’s Guide

TEW-733GR

• 802.11 Mode: Select the appropriate mode for your network.

• Channel Width: This setting only applies to wireless devices connecting at

802.11n. Select the appropriate channel width for your wireless network.

o 20 MHz: This mode operates using a single 20MHz channel for wireless

devices connecting at 802.11n. This setting may provide more stability than

Auto 20/40 MHz for connectivity in busy wireless environments where there

are several wireless networks in the area.

o Auto 20/40 MHz: This mode can automatically switch between using a single

20MHz channel or 40MHz (two 20MHz channels). When 40MHz is active, this

mode is capable of providing higher performance only if the wireless devices

support the 40MHz channel width. Enabling 20/40MHz typically results in

substantial performance increases when connecting to an 802.11n client.

• Visibility Status

o Visible: Allows wireless devices to search and discover your wireless network

name (also called SSID) broadcasted by your router.

o Invisible: Turns off the ability for wireless devices to find your network. It is

still possible for wireless devices to be configured to connect to your wireless

network.

Note: Setting this option to Invisible, may cause issues with your wireless

adapters.

• WMM: Wi-Fi Multimedia is a Quality of Service (QoS) feature which prioritizes

audio and video data packets. This feature requires the wireless device to also

support WMM. Click Enabled (recommended) or Disabled to turn this feature on

or off on your router.

Guest Zone

Access > Guest Zone

Creating an isolated and separate wireless guest network allows wireless clients to

connect to your network for Internet access only and keep your local LAN network safe

by restricting guest access to your LAN network resources such as shared documents

and media files on your computers, network storage, and printers.

1. Log into your router management page (see “Access your router management page

”

on page 22).

2. Click on Access and click on Guest Zone.

3. Review the Guest Zone settings, click Save Settings to continue.

• Enabled: Check the option to enable the Guest Network. Select Always to have

guest zone enabled always or select a schedule rule in the pull down menu.

• Wireless Network Name (SSID): This acronym stands for Service Set Identifier and

is the name of your wireless network. It differentiates your wireless network from

others around you. It is recommended to use a different name from your primary

wireless network to a name that you can easily identify and differentiate from the

primary. You can reference your guests to access this network instead of the

primary.

• Enable Routing Between Zone: Select this option to allow guests to restrict your

guest to only have access to the Internet.

• Security Mode: Select the wireless security you would like to apply to the guest

zone.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-733GR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-733GR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info