Bedienungsanleitung Trendnet TEW-751DR (Seite 18 von 61) (Englisch)

541580

Zoom out

Zoom in

Vorherige Seite

1/61

Nächste Seite

TRENDnet User’s Guide

TEW-751DR

Basic wireless settings

Wireless > Basic

This section outlines available management options under basic wireless sub tab for

both 2.4GHz and 5GHz wireless sections.

1. Log into your router management page (see “Access your router management page

”

on page 25).

2. Click on Wireless and click on Basic scroll down to Wireless Network Settings (2.4GHz

or 5GHz)

3. To save changes to this section, click Save Settings when finished.

• Enable Wireless – Check the option to enable the wireless or uncheck to disable.

Note: It is recommended to leave this setting checked.

o New Schedule – The schedule function allows you to define a schedule when the

wireless should be turned on. To define a new schedule, click New Schedule and

refer to page 35. After you have created a new schedule, click the drop-down list

and the new schedule will be available for selection.

• Wireless Network Name (SSID): Enter the wireless name (SSID) for your wireless

network. This acronym stands for Service Set Identifier and is the name of your

wireless network. It differentiates your wireless network from others around you.

By default, the router’s wireless name is unique to the device. If you choose to

change the SSID, change it to a name that you can easily remember.

When applying the 802.11 Mode setting, please keep in mind the following:

• Wireless devices that support 802.11n are backwards compatible and can connect

wirelessly at 802.11g or 802.11b.

• Connecting at 802.11b or 802.11g will limit the capability of your 802.11n

supported wireless devices from obtaining higher performance and data rates.

• Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless

network may degrade the wireless network performance below the higher

performance and data rates of 802.11n.

• Wireless devices that only support 802.11b or 802.11g will not be able to connect

to a wireless network that is set to 802.11n only mode.

• Wireless devices that only support 802.11b will not be able to connect to a wireless

network that is set to 802.11g only mode.

• Enable Auto Channel Scan – Check this option to set your router to scan for which

wireless channels to use automatically.

• Wireless Channel – Unchecking the Enable Auto Channel Scan option will you to

manually set the channel on which the router will broadcast. Click the drop-down

list and select the desired Channel for wireless communication. The goal is to select

the Channel that is least used by neighboring wireless networks.

• Transmission Rate – Allows you to lock down the wireless transmission rate.

Note: This feature is only available when using 802.11 n only mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-751DR Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-751DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info