Bedienungsanleitung Trendnet TEW-810DR (Seite 14 von 59) (Englisch)

541408

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

TRENDnet User’s Guide

TEW-810DR

Connect wireless devices using WPS

WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your

wireless network. If your wireless devices support WPS, you can use this feature to

easily add wireless devices to your network.

Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or

if you are using WEP security.

There are two methods the WPS feature can easily connect your wireless devices to

your network.

• Push Button Configuration (PBC) method

o (RECOMMENDED) Hardware Push Button method–with an external button

located physically on your router and on your client device

o WPS Software/Virtual Push Button - located in router management page

• PIN (Personal Identification Number) Method - located in router management page

Note: Refer to your wireless device documentation for details on the operation of

WPS.

Recommended Hardware Push Button (PBC) Method

• Note: It is recommended that a wireless key (passphrase or password) is created

before connecting clients using the PBC method. If no wireless key is defined when

connecting via PBC, the router will automatically create an encryption key that is 64

characters long. This 64 character key will then have to be used if one has to

connect computers to the router using the traditional connection method.

To add a wireless device to your network, simply push the WPS button on the wireless

device you are connecting (consult client device User’s Guide for length of time), then

push and hold the WPS button located on your router for 3 seconds and release it. A

blue LED on your router WPS button will flash indicating that the WPS setup process has

been activated on your router. (See “Product Hardware Features

” on page 5)

For connecting additional WPS supported devices, repeat this process for each

additional device.

PBC (Software/Virtual Push Button)

Wireless (2.4GHz or 5GHz)> WPS

In addition to the hardware push button located physically on your router, the router

management page also has push button which is a software or virtual push button you

can click to activate WPS on your router.

1. Log into your router management page (see “Access your router management page

”

on page 16).

2. Click on the Advanced tab.

3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz

and click on WPS.

4. To add a wireless device to your network, simply click the Add Enrollee button in the

router management page, then push the WPS button on the wireless device (consult

wireless device’s User’s Guide for length of time) you are connecting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-810DR Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-810DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info