Bedienungsanleitung Trendnet TEW-810DR (Seite 36 von 59) (Englisch)

541408

Zoom out

Zoom in

Vorherige Seite

1/59

Nächste Seite

TRENDnet User’s Guide

TEW-810DR

3. Click on the Firewall section and click on Virtual Server Rule.

4. Select Enable in the Virtual Server Function section. Review the virtual server settings.

Click Add to save settings.

• Rule Enable: Check to enable virtual server rule

• Rule Name: Enter the name you would like to assign to the virtual server rule.

• IP Address: Enter the IP address of the device to forward the port (e.g.

192.168.10.101).

• Protocol: Select the protocol required for your device. TCP or UDP.

Note: Please refer to the device documentation to determine which ports and

protocols are required. You should assign a static IP address to the device or use

DHCP reservation to ensure the IP address of the device does not change.

• Public/Private Public Port: Enter the port number used to access the device from

the Internet.

• Inbound Filter: Select the defined inbound filter you would like to apply or select

Allow All.

• Schedule: Select the defined schedule you would like to have the rule to be applied

(see “Create Schedule

” section on page 34).

Note: The Public Port can be assigned a different port number than the Private Port

(also known as port redirection), however it is recommended to use the same port

number for both settings. Please refer to the device documentation to determine

which ports and protocols are required.

Example: To forward TCP port 80 to your IP camera

1. Setup DynDNS service (see Identify Your Network

section page 41).

2. Access TRENDnet IP Camera management page and forward Port 80 (see product

documentation)

3. Make sure to configure your network/IP camera to use a static IP address.

Note: You may need to reference your camera documentation on configuring a

static IP address.

4. Log into your router management page (see “Access your router management page

”

on page 15).

5. Click on Advanced then Firewall, click on Virtual Server.

6. Click Enabled to turn on this virtual server.

7. Next to Rule Name, you can enter another name for the virtual server, otherwise,

leave the default name.

8. Next to IP Address, enter the IP address assigned to the camera. (e.g. 192.168.10.101)

9. Next to Protocol, make sure TCP is selected in the drop-down list.

10. The Private Port and Public Port, make sure port number 80 is configured for both

settings.

11. Select Allow All on Inbound Filter section.

12. Select Always for Schedule section.

13. To save the changes, click Add.

Special Applications

Advanced > Firewall > Special Applications

Special applications (also called port triggering) is typically used for online gaming

applications or communication applications that require a range of ports or several

ports to be dynamically opened on request to a device on your network. The router will

wait for a request on a specific port or range of ports (or trigger port/port range) from a

device on your network and once a request is detected by your router, the router will

forward a single port or multiple ports (or incoming port/port range) to the device on

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-810DR Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-810DR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info