Bedienungsanleitung Trendnet TEW-812DRU (Seite 20 von 69) (Englisch)

541305

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

TRENDnet User’s Guide

TEW-812DRU

bandwidth settings. Enabling 40MHz or 80MHz typically results in substantial

performance increases when connecting an 802.11n or 802.11ac client. Note:

Please note that 80MHz channel bandwidth is only available for 802.11ac 5GHz.

Guest Network

Wireless (2.4GHz or 5GHz) > Guest Network

Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows

wireless clients to connect to your network for Internet access only and keep your local

LAN network safe by restricting guest access to your LAN network resources such as

shared documents and media files on your computers, network storage, and printers.

1. Log into your router management page (see “

Access your router management page”

on page 16).

2. Click on the Basic tab.

3. Click on Guest Network section.

4. Review the Guest Network settings, click Apply when finished.

• Enabled: Check the option to enable the Guest Network.

• Wireless Name (SSID): This acronym stands for Service Set Identifier and is the

name of your wireless network. It differentiates your wireless network from others

around you. It is recommended to use a different name from your primary wireless

network to a name that you can easily identify and differentiate from the primary.

You can reference your guests to access this network instead of the primary.

• Internet Access Only: By default, the option is checked to allow guests to only

access the Internet and restrict access to your local LAN network. Please note that

unchecking this option will open access to local LAN network to guests.

• Wireless Client Isolation: Checking this option will restrict guests from

communicating with each other over the guest network such as share files.

5. Under Security Policy, you can apply a different wireless security type and key to the

guest network. Please refer to page 15 to find out about different security types and

page 16 for wireless security configuration.

Advanced Guest Network Settings

Wireless (2.4GHz or 5GHz) > Guest Network>Advanced Guest Network Settings

At the bottom of the guest network page, you can click the “Advanced Guest Network

Settings” to configure the additional guest network options such as the guest network

interface IP address, DHCP server IP address range, and DHCP reservation.

Review the Advanced Guest Network settings, click Apply when finished.

In most cases, you do not need to change your guest network IP address settings.

Typically, the router IP address settings only needs to be changed, if you plan to use

another router in your network with the same IP address settings, if you are connecting

your router to an existing network that is already using the IP address settings your

router is using, or if you are experiencing problems establishing VPN connections to

your office network through your router.

• IP Address – Enter the new guest network IP address.

(e.g. 192.168.100.1)

• Subnet Mask – Enter the new guest network subnet mask.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-812DRU Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-812DRU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info