Bedienungsanleitung Trendnet TEW-812DRU (Seite 26 von 69) (Englisch)

541305

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

TRENDnet User’s Guide

TEW-812DRU

4. In the WAN Connection Type drop-down list, click the type of Internet connection

provided by your Internet Service Provider (ISP).

5. Complete the fields required by your ISP.

6. Complete the optional settings only if required by your ISP.

7. To save changes, click Apply.

Note: If you are unsure which Internet connection type you are using, please contact

your ISP.

Clone a MAC address

Advanced > Setup > WAN Setting

On any home network, each network device has a unique MAC (Media Access Control)

address. Some ISPs register the MAC address of the device (usually a router or a

computer) connected directly to the modem. If your computer MAC address is already

registered with your ISP and to prevent the re-provisioning and registration process of a

new MAC address with your ISP, then you can clone the address (assign the registered

MAC address of your previous device to your new router). If you want to use the MAC

address from the previous device (computer or old router that directly connected to the

modem, you should first determine the MAC address of the device or computer and

manually enter it into your router using the clone MAC address feature.

Note: For many ISPs that provide dynamic IP addresses automatically, typically, the

stored MAC address in the modem is reset each time you restart the modem. If you

are installing this router for the first time, turn your modem before connecting the

router to your modem. To clear your modem stored MAC address, typically the

procedure is to disconnect power from the modem for approximately one minute,

then reconnect the power. For more details on this procedure, refer to your

modem’s User Guide/Manual or contact your ISP.

1. Log into your router management page (see “

Access your router management page”

on page 16).

2. Click on the Advanced tab.

3. Click on the Setup section and click on WAN Setting.

4. Next to MAC Address field, enter the MAC address of your computer. Click Apply to

save settings

Note: You can check the DHCP Client List for the MAC addresses of the devices on

your network, see page 36 or refer to your computer or device documentation to

find the MAC address.

Add static routes to your router

Advanced > Setup > Routing

You may want set up your router to route computers or devices on your network to

other local networks through other routers. Generally, different networks can be

determined by the IP addressing assigned to those networks. Generally speaking and for

the case of an example, your network may have 192.168.10.x IP addressing and another

network may have 192.168.20.x IP addressing and because the IP addressing of these

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-812DRU Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-812DRU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info