Bedienungsanleitung Trendnet TEW-812DRU (Seite 35 von 69) (Englisch)

541305

Zoom out

Zoom in

Vorherige Seite

1/69

Nächste Seite

TRENDnet User’s Guide

TEW-812DRU

Access Control

Advanced > Security > Access Control

You may want to block computers or devices on your network access to specific ports

(used or required by a specific application) to the Internet.

1. Log into your router management page (see “

Access your router management page”

on page 16).

2. Click on the Advanced tab.

3. Click on the Security section and click on Access Control.

3. Under Access Control, click the LAN Client Filter Function drop-down list and select

Enabled to activate the feature.

4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.

• LAN IP Address Range: Enter the IP address or IP address range to apply the

protocol (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30).

Note: The filter will not be applied to IP addresses outside of the range specified.

• Protocol: Select the protocol type to filter. TCP, UDP.

• Destination Port Range: Enter the port number or range of port numbers to apply

in the firewall rule. (e.g. 80-80 or 20-21). For all ports, use the port range 1 - 65534.

• Schedule: Click the drop-down list to select the pre-defined schedule to apply. The

filter will only be active during the time period defined in the pre-defined schedule.

(See “

Create Schedule” section on page 33).

Note: Before applying scheduling, please ensure your Time settings are configured

correct and you have defined a schedule. See

page 32 to configure Time Settings

and see

page 33 to create a schedule.

• Enabled: Checking the Enabled option activates on the LAN Client Filter rule.

Open a device on your network to the Internet

This router can provide access to devices on your local area network to the Internet

using the Virtual Server, Special Application, method (DMZ NOT recommended).

DMZ

Advanced > Firewall > DMZ

You may want to expose a specific computer or device on your network to the Internet

to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature

that makes all the ports and services available on the WAN/Internet side of the router

and forwards them to a single IP address (computer or network device) on your

network. The DMZ feature is an easy way of allowing access from the Internet however,

it is a very insecure technology and will open local area network to greater threats from

Internet attacks.

It is strongly recommended to use Virtual Server (also called port forwarding, see

“

Virtual Server” on page 35) to allow access to your computers or network devices from

the Internet.

1. Log into your router management page (see “

Access your router management page”

on page 16).

2. Click on the Advanced tab.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-812DRU Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-812DRU

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info