Bedienungsanleitung Trendnet TPL-410AP (Seite 57 von 65) (Englisch)

541237

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

TRENDnet User’s Guide

TPL-410AP / TPL-410APK

Please reference the items below if you continue to experience difficulty with installing

and using your Powerline adapters.

• Do not plug the Powerline adapters into a power strip. Make sure to plug the

adapters directly into a power outlet and not through power strip. Using

adapters through a power strip may negatively affect Powerline connectivity

and performance.

• Do not use the Sync button for more than 2 Powerline adapters to connect

simultaneously. Wait for each Powerline adapter to connect to your Powerline

network one at a time before connecting the next adapter. Using more than

one adapter to Sync simultaneously may cause some of your adapters not to

Sync and establish connection to your Powerline network.

• Power-cycle the Powerline adapters by disconnecting them from their power

outlets for 15 seconds and then reconnect them.

• If the Powerline (PL) LED is red, try plugging the Powerline adapter into another

available power outlet. The quality of the connection may be better in a

different power outlet.

• If you are having issues connecting the Powerline adapters after changing the

encryption key using the Sync button or Powerline utility, reset the Powerline

adapters to defaults using the physical Reset button.

• Using a pin or paperclip; press and hold the Reset button for 1 second on each

Powerline adapter. All LEDs will turn off then turn back on. This will reset the

Powerline adapters to their default settings. The default encryption key is

HomePlugAV.

• The Powerline adapters can provide better connectivity and performance when

plugged directly into a power outlet. Connecting the Powerline adapters to a

power strip or surge protector may degrade or block Powerline signals.

• Avoid using the Powerline adapters on GFI protected outlets and electrical

systems with AFCI circuit breakers. They may degrade or block Powerline

signals.

• The Powerline adapters should not be used in areas with excessive heat.

• Florescent and incandescent lighting can generate significant Powerline

interference.

• If your building has more than one circuit breaker box, the Powerline adapter

may not be able to establish connectivity between them. In this case, connect a

Powerline adapter into a power outlet located on each of the circuit breaker

boxes. Then connect an Ethernet cable between the Powerline adapters to

bridge the two circuits together.

In addition to this User’s Guide, you can find help below:

• http://www.trendnet.com/support

(documentation, downloads, FAQs, how to contact technical support)

• Autorun CD (Quick Installation Guide)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TPL-410AP Seite 57

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TPL-410AP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info