541228
100
Zoom out
Zoom in
Vorherige Seite
1/127
Nächste Seite
1
TABLE OF CONTENTS
ABOUT THIS GUIDE ................................................... 3
INTRODUCTION ............................................................ 4
FEATURES AND BENEFITS .................................................. 5
UNPACKING THE PACKAGE ................................................ 7
SYSTEM REQUIREMENT ..................................................... 8
COMPONENTS GUIDE ......................................................... 9
HARDWARE INSTALLATION ................................ 12
A
TTACHING THE
C
AMERA TO THE
S
TAND
........................ 12
CONNECTING THE ETHERNET CABLE ............................... 13
ATTACHING THE POWER SUPPLY ..................................... 13
SECURITY ...................................................................... 14
APPLICATION .............................................................. 15
APPLICATION DIAGRAMS OF THE CAMERA ...................... 16
USING THE UTILITY ................................................ 17
AUTO-RUN INSTALLATION .............................................. 17
SETUP WIZARD ................................................................ 19
USING THE CAMERA ............................................... 28
WEB CONFIGURATION UTILITY ....................................... 28
ADMINISTRATION ............................................................ 30
2
VIEW VIDEO ACTIVEX MODE ....................................... 64
VIEW IMAGE JAVA MODE ............................................. 65
IPVIEW PRO .................................................................. 67
INSTALLATION ................................................................. 67
GETTING STARTED........................................................... 71
USING IPVIEW PRO ......................................................... 74
CONFIGURING THE SYSTEM ............................................. 80
APPENDIX ..................................................................... 96
A FREQUENTLY ASKED QUESTIONS ................................ 96
B PING YOUR IP ADDRESS ............................................. 99
C TROUBLE SHOOTING .................................................. 100
D TIME ZONE TABLE ..................................................... 104
E XPLUG CONTROL INSTALLATION ................................ 106
F ADJUST CAMERA FOCUS ............................................. 110
G SPECIFICATION ........................................................... 111
H GLOSSARY OF TERMS ................................................. 113
F .................................................................................... 116
G ................................................................................... 116
3
ABOUT THIS GUIDE
This manual provides instructions and illustrations on how to use
your Camera, includes:
z Chapter 1, Introduction, provides the general information
on the camera.
z Chapter 2, Hardware Installation, describes the hardware
installation procedure for the camera.
z Chapter 3, Security, explains the security feature of the
camera.
z Chapter 4, Application of the Camera, provides the
illustrations of the camera’s applications.
z Chapter 5, Using the Utility, guides you through the
configuration using the utility.
z Chapter 6, Using the Camera, guides you through the
configuration using the web browser.
z Chapter 7, IPView Pro, helps you to install and use the
software.
z Chapter 8, Appendix.
Please note that the illustrations or setting values in this manual are
FOR YOUR REFERENCE ONLY. The actual settings and values
depend on your system and network. If you are not sure about the
respective information, please consult your network administrator or
MIS staff for help.
4
1
INTRODUCTION
Thank you for purchasing TV-IP100-N/ TV-IP100W-N Camera,
a camera device that can be directly connected to an Ethernet or
Fast Ethernet network. TV-IP100W-N supports additional
wireless transmission based on the IEEE 802.11b/g standard.
Compared to the conventional PC Camera, the Camera features a
built-in CPU and web-based solutions that can provide a cost-
effective solution to transmit real-time high-quality video images
for monitoring.
The camera can be managed remotely, so that you can use a web
browser to access and control it from any desktop/notebook
computer over the Intranet or Internet. The simple installation
procedures and web-based interface allow you to integrate it into
your network easily. With comprehensive applications supported,
the Camera is your best solution for remote monitor, high quality,
and high performance video images.
5
Features and Benefits
Ease To Use
The TV-IP100-N/TV-IP100W-N (Wireless) Camera is a
standalone system with built-in CPU requiring no special
hardware (such as PC frame capture cards) or software required.
The Camera supports both ActiveX mode (for Internet Explorer
users) and Java mode (for Internet Explorer and Netscape
Navigator users). Once you have a valid IP address, just connect
it and you can view the image from your camera.
Support Variety of Platforms
Support TCP/IP networking, SMTP e-mail, HTTP and other
Internet related protocols, and can be utilized in a mixed
operating system environment such as Windows, Unix, and Mac.
It can be integrated easily into other www/Intranet applications.
Web Configuration
Using a standard web browser, the administrator can configure
and manage the camera directly from his own web page via the
Intranet or Internet. Up to 64 users name and password are
permitted with privilege setting controlled by the administrator.
Remote Utility
The powerful IPView Pro application assigns the administrator
with a pre-defined user ID and password. The administrator can
remotely modify the Camera settings or upgrade the firmware via
6
Intranet or Internet. Users are also allowed to monitor the image,
and take snapshots.
Broad Range of Applications
With today’s high-speed Internet services, the camera can provide
the ideal solution for live video images and audio sounds over the
Intranet and Internet. The camera allows remote access from a
web browser for live image viewing, so that you can use it to
monitor various objects and places anytime and anywhere, such
as homes, offices, banks, hospitals, child-care centers, amusement
parks and other varieties of industrial and public monitoring. The
camera can be used for intruder detection; in addition, it can
capture still images for archiving and many other applications.
7
Unpacking the Package
Unpack the package and check all the items carefully.
One TV-IP100-N/ TV-IP100W-N
One Detachable Antenna ( TV-IP100W-N only)
One Multi-Language Quick Installation Guide
One Driver & Utility CD-ROM with User’s Guide
One External Power Adapter (5VDC 2.5A)
One RJ-45 Network Cable
One Camera Mounting Bracket
If any packaging content is damaged or missing, please contact
your local dealer immediately. Also, keep the box and packing
materials in case you need to ship the unit in the future.
8
System Requirement
Networking
Local Area Network:
10Base-T Ethernet or 100Base-TX Fast Ethernet.
Wireless Local Area Network ( TV-IP100W-N Only):
IEEE 802.11b/g Wireless LAN.
Accessing the Camera
For Web Browser Users
Operating System: Microsoft® Windows® 98SE/ME/
2000/XP/Vista
CPU: 300MHz or above
Memory Size: 32MB (64MB recommended)
Resolution: 800x600 or above
Microsoft® Internet Explorer 5.0 or above; Netscape 6.0 or
above
For IPView Pro Application Users
OS: Microsoft® Windows® 98SE/ME/2000/XP/Vista.
CPU: 1GHz or above
Memory Size: 256MB
Resolution: 1024x768 or above
NOTE: When you connect multiple cameras and monitor their images
synchronously. it is recommended to use a high performance system such as
a Pentium4 & 2.4GHz PC.
9
Components Guide
This section provides the information of camera and explains the
function of each component.
Front/Rear Panel
TV-IP100-N
TV-IP100W-N
10
1. Screw Hole
It located on the top/bottom panel of the camera. The screw hole
is used to connect the camera stand onto the camera by attaching
the screw head on the camera stand into the screw hole of the
camera.
2. Power LED
A steady BLUE light indicates that the Camera is powered on.
3. Link LED
A steady ORANGE light indicates that the camera has good
connection to LAN/WLAN. It begins flashing to indicate the
camera is receiving/sending data from/to the LAN/WLAN.
4. Power Connector
The DC power input connector is located on the back of Camera’s
rear panel, and is labeled DC5V with a single jack socket to
supply power to the Camera. Power will be generated when the
power supply is connected to a wall outlet.
5. Reset Button
Reset will be initiated when this button is pressed. Factory Reset
will be initiated when this button is pressed continuously for five
seconds.
11
6. 10/100 Ethernet LAN Port
This RJ-45 connector is used to connect the 10Base-T Ethernet or
100Base-TX Fast Ethernet network (which should be Category 5
twisted-pair cable). The port supports the N-Way protocol &
Auto-MDIX, it allowing the camera automatically detects or
negotiates the transmission speed of the network.
7. Detachable Antenna ( TV-IP100W-N)
The detachable external antenna allows you to adjust its position
to obtain the maximum signal.
12
2
HARDWARE
INSTALLATION
Attaching the Camera to the Stand
The Camera comes with a camera
stand, which has a swivel ball
screw head that can be attached to
the top/bottom of camera’s screw
hole. Attach the camera to the
stand and station it for your
application. There are three holes
located in the base of the stand
allowing the Camera to be
mounted on the ceiling or any
wall securely.
13
Connecting the Ethernet cable
Connect an Ethernet cable to the
RJ-45 Port, and then connect it to
the network.
Attaching the Power Supply
Attach the power supply to the
power connector of the Camera.
Then connect the power supply to
the wall outlet.
14
3
SECURITY
To ensure the highest security and prevent unauthorized usage of
the camera, the administrator has the exclusive privilege to access
the System Administration for settings and control requirements
to allow users the level of entry and authorize the privileges for
all users. The camera supports multi-level password protection.
Access to the camera is strictly restricted to define the user who
has a “User Name” and “User Password” that is assigned by the
administrator.
The administrator can release a public user name and password to
allow remote users to access the camera.
NOTE: Since the default settings are Null String, it is highly recommended to
set the "Admin Password" when you are the first time to use the camera.
Once the password is defined, only the administrator is permitted to manage
the camera. The security feature of the camera will not be enabled until the
"Admin Password" is defined; therefore, you have to complete this procedure
as soon as possible.
15
4
APPLICATION
The TV-IP100-N/ TV-IP100W-N Camera can be applied in wide
variety of applications, including:
z Monitoring of local and remote places and objects such as
construction sites, hospitals, parks, schools and day-care
centers through the use of a web browser.
z Capture single frame images from the IPView Pro
application.
z Configure the camera to upload image or send-mail
messages with a single frame image.
The following section provides the typical applications for your
camera with the IPView Pro application, and also includes some
basic knowledge to assist in the installation and configuration of
the camera.
16
Application Diagrams of the Camera
Home or Business Applications
17
5
USING THE UTILITY
This chapter describes the software utilities for the IP camera,
including how to set up your Camera with the utility. The Setup
Wizard is designed with a user-friendly interface that allows you
to set up the Camera easily.
Auto-Run Installation
Insert the Installation CD-ROM into your computer’s CD-ROM
drive to initiate the Auto-Run program.
18
Setup Wizard – click to launch the Setup Wizard program
which is helpful to set up the IP Camera configuration easily
and quickly.
IPView– click to install IPView program to control and
navigate the camera. Please refer to the chapter 6 section
for detailed information on installing the utility.
Xplug Control – click to launch Xplug control. Please refer
to Trouble Shooting section for more detail installation.
User's Guide – click to preview the User's Guide in PDF
format for detailed information of the IP Camera
Browse CD-ROM – if you want to browse the contents of
the Installation CD-ROM, click this button and the contents
of the CD will be available for preview.
Exit – click to close the Auto-Run program.
19
Setup Wizard
To avoid IP address conflicts in your network, you can use Setup
Wizard to change the related settings of your Camera (such as the
IP address) after finishing hardware installation.
Installing Setup Wizard
1. Click Setup Wizard from the Auto-Run menu screen. The
InstallShield Wizard will appear. Click Next > when the
Welcome to the InstallShield Wizard for Setup Wizard
screen appears.
2. Click Yes > to accept the End User License Agreement.
20
3. Click Browse to choose the desired destination location. By
default, the destination location is C:\Program Files\Setup
Wizard. Then click Next >.
4. The InstallShield Wizard starts to install the software. A
status screen appears indicating the progress of the
installation.
5. When the InstallShield Wizard Complete window appears,
click Finish.
.
21
After installing the utility, the application program for the camera
is automatically installed to your computer, and creates a folder in
Start\Programs\SetupWizard.
Using Setup Wizard
This section describes the operation of Setup Wizard. To launch
the Wizard:
1. Click Start -> Programs -> Setup Wizard, and then click
SetupWizard.
2. The window below will appear. The IP Camera Setup
Wizard will automatically search for IP Cameras within the
network and assign an available IP address for your camera.
22
Double click the found Device. The Windows Internet
Explorer will ask you for User name and Password. Please
type in default “admin” in both field and click OK. After this,
you can access this camera. (Go to page 28)
Wizard
- If you want to assign a dedicate IP address, you can
change the IP address setting.
23
- Select IP Camera, then click Wizard
- If the Camera’s default IP is different than your
network’s IP subnet, the Wizard will help you to search
for a proper IP address. Click YES to change the IP
address.
- Use the DHCP assigned IP address or manually set the IP
address. The IP address must match your network’s IP
subnet. Then click OK.
Note:
Please note the IP address. This is the IP address for
accessing the browser configuration of your camera from
24
your local area network. Your IP Address might look
different than the example above.
- Assign Admin ID & Password here. By default, the
Admin ID and Password are “admin”. You can select
Change” to type new Admin ID & Password. Then
click Next (Right Arrow)
- Setup the Primary DNS or Secondary DNS if necessary.
Then click Next (Right Arrow)
25
- Wireless Configure setting. (For TV-IP100W-N only)
Select the connection mode, type in your wireless
network’s SSID, select the security mode and then click
Next (Right Arrow)
- Select the Encryption Mode, key format and enter the
key. Then click Next (Right Arrow).
- Review all the setting then click restart.
26
Search
- This button will search the available camera(s) within the
network.
Link
- This button links to the web configuration section.
27
About
- This button displays Setup Wizard information.
Exit
- Exit the Setup Wizard
28
6
USING THE CAMERA
You can access and manage the camera through: 1) a web
browser, and 2) the enclosed software IPView Pro. This chapter
describes the Web Configuration Utility, and provides the
instructions on using the camera with a web browser.
Web Configuration Utility
Whenever you want to configure the camera, open your web
browser (e.g. Internet Explorer in this manual), and type the
assigned DHCP IP address which can be found by using Setup
Wizard in the Address bar and press [Enter]. If your network
cannot assign DHCP IP address on your camera, your camera
default IP will be changed to 192.168.10.30.
NOTE: The computer’s IP address must correspond with the camera’s
IP address in the same segment for devices to communicate. Please
refer to Chapter 5 for IP setting.
29
Welcome Screen of the Configuration Utility
After the default IP address is entered from the browser, the
Camera Welcome screen will appear with a still image. There
will be three options to choose from to set-up and view your
Camera, including:
z Administration
z View Video – ActiveX
z View Video – Java
Pre-view area
Camera IP address
30
Administration
On the Welcome screen of the Configuration Utility, click
Administration to enter the administration window that contains
the settings required for the camera in the left hand menu bar,
including Status, Configuration, Tools and Help.
TIP: Click Save to store the settings, or Cancel to abandon, or Refresh to
reload the status. Click Home on the top menu bar will link to the Welcome
window.
Administration
J
Status
The Status window contains the information of your
configuration. Click the items in the left column to view your
settings, including: System, Video, Wireless (Wireless is for
TV-IP100W-N only), Network, and Active User.
31
System
Click the System item in the left column to display the device
status of your camera.
- Device Status: The information about the camera,
including the Camera Name, Location, Model, Firmware
Version, MAC Address and IP Address, can be found in
this field.
32
- Ethernet Status: You can monitor the networking status
in this field, including the Link (network connection),
Speed, and the Duplex mode.
Video
Click the Video item in the left column to display the video
configuration of your camera.
- Video Status: The video configuration about the camera,
including the Video Resolution, Compression Rate,
Frame Rate, Frame Size and IP Address, can be found in
this field.
33
Wireless (for TV-IP100W-N only)
Click the Wireless item in the left column to display the
information of the wireless LAN.
- Wireless Status: The items in this field display the
information of the wireless LAN, such as the Connection
Mode (Infrastructure or Ad-Hoc), Link, SSID, Channel,
Transmission Rate, and WEP Encryption.
34
Network
Click the Network item in the left column to display the
information of the LAN.
- Network Status: The items in this field display the
information of the LAN, such as the IP Address, Subnet
Mask, Default Gateway, Primary DNS Address,
Secondary DNS Address, Dynamic DNS, Secondary
HTTP Port, and UPnP.
35
Active Users
Click the User item in the left column to display the user(s)
information.
- Active Users: The items in this field display the user(s)
information, including the user(s) IP address, Name, and
DateTime.
36
Administration
J
Configuration
The Configuration window contains commands for settings that
are required to input key details to setup the camera for operation.
Click Configuration in the top menu bar and the Configuration
window will appear as below:
System
Click the System item in the left column to setup the basic
configuration of your camera.
37
- System Setting: In this field, you can configure the
basic information of your camera.
Camera Name: This field is used to enter a
descriptive name for the device. The default setting
for the Camera Server Name is CS-xxxxxx, where
xxxxxx is the last six digit of the MAC Address. The
maximum length is 32 (printable ASCII).
Location: This field is used to enter a descriptive
name for the location used by the camera (optional).
Admin: This field is used to enter the administrator
name along with the password to access the System
Administration settings. Be sure to enter the password
twice to confirm the details once in the Admin
Password field and again in the Confirm Password
field.
The default setting for administrator is “admin”, and
the administrator name is limited a maximum length of
12 (printable ASCII) characters and enter the
administrator password with a maximum length of 8
(printable ASCII) characters.
38
It is highly recommended to set your own Admin ID
and Admin Password as soon as possible to enable
security option for the Camera to function.
LED Control: This option allows user to setup the
LED illumination as desired. This feature provides the
flexibility when surveillance activity is ON.
There are three options as follows:
Normal
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator.
When WLAN activity is present the LED
indicator will flash steadily.
OFF
Power - LED indicator is off.
Link – LED indicator is off.
Dummy
Power - Steady On of the LED indicator.
Link - Steady On of the LED indicator with
random flashing.
The default setting for the LED control is at Normal.
When you have configured the LED control, the
correct illumination will be set after 1 minute.
39
Video
Click the Video item in the left column to setup the image
configuration of your camera.
- Video Setting: In this field, you can configure the basic
information of your camera.
Video Resolution: Select the desired video resolution
format, including
160x120, 320x240 (default) and
640x480.
Compression Rate:
Select the desired compression
rate with five levels from Very Low to Very High.
Higher video compression rate will generate more
compact file size with less video quality and vise-
versa. The default setting is Medium.
Frame Rate: Select the frame rate desired with
default setting at Auto for optimal frame rate.
40
Brightness Control: Adjust the brightness level with
default setting at 64.
Contrast Control: Adjust the contrast level with
default setting at 64.
Saturation Control: Adjust the saturation with
default setting at 64.
Light Frequency: Adjust the light frequency to suit
your area of operation from the options either 50 Hz or
60 Hz (default).
41
Wireless (for TV-IP100W-N only)
Click the Wireless item in the left column to setup the wireless
LAN configuration of your camera.
42
- Wireless Interface
Connection Mode: Use this option to determine the
type of wireless communication for your camera.
There are two choices of Infrastructure mode and Ad-
Hoc mode. The default setting is Infrastructure.
SSID: The SSID (Service Set Identifier) is the name
assigned to the wireless network. It will auto-detect
and display the SSID of wireless network connected in
this box (it displays default initially). This default
setting will let the camera connect to ANY access
point under the infrastructure network mode.
To connect the camera to a specific access point on the
network, please make sure to set the SSID of the
camera to correspond with the access point’s SSID for
communication. Type any string up to 32 characters
long (spaces, symbols, and punctuation are not
allowed) in the Network Name box.
43
To connect the camera to an Ad-Hoc wireless
workgroup, make sure to set the same wireless channel
and SSID to match with the PC/Notebook’s
configuration for direct wireless communication.
Wireless Channel: This pull-down menu provides the
wireless channel for communication. A "channel" is a
range of frequencies to be used in communication
between the camera and access point in Infrastructure
mode, or the camera and PC/Notebook in Ad-Hoc
mode. Select the appropriate channel from the list
provided depending on the regulatory region where the
unit is sold. The default setting is at channel 11.
Transmission Rate: Select the data transmit rate from
this pull-down menu. The default setting is Fully
Automatic.
- Encryption
44
WEP Encryption: Wireless network communications
can be intercepted easily. WEP (Wired Equivalent
Privacy) is an encryption method specified by the
IEEE 802.11g standard to make any intercepted
communications extremely difficult to interpret by
unauthorized parties.
The default setting for this
option is Disable.
WEP Key Length: Select the proper setting for WEP
Encryption. In general, a larger key length creates a
stronger cipher. The default is 64-bits.
WEP Key Format: To enable WEP Encryption, you
should decide the encryption format first by selecting
the ASCII or HEX option, and then input the WEP
key (in the following Key 1~4 box).
ASCII input format:
ASCII format causes each character you type to be
interpreted as an eight-bit value. All unaccented upper-
and lower-case Western European characters that can be
input through your keyboard's typing zone are valid. To
setup a 64-bit WEP key, input 5 ASCII characters. For
example, ‘12345’. To setup an 128-bit WEP key, input 13
ASCII characters. For example, ‘1234567890123’. These
character counts result in bit counts of 40 and 104
respectively; the camera will automatically pad your input
to a bit count of 64 or 128.
HEX input format:
Hex format causes each pair of characters you type to be
interpreted as an eight-bit value in hexadecimal (base 16)
notation. Only the digits 0 through 9 and the letters A
through F (in upper or lower case) are valid. To setup a
64-bit WEP key, input 10 HEX format. For example,
‘3132333435’, which is the same with ASCII input ‘12345’.
To setup an 128-bit WEP key, input 26 HEX format. For
example, ‘31323334353637383930313233’, which is the
same with ASCII input ‘1234567890123’. These character
counts result in bit counts of 40 and 104, respectively; the
45
Wireless Camera will automatically pad your input to a bit
count of 64 or 128.
Encrypt Data Transmissions Using: Use this pull-
down menu to decide to use Key 1, 2, 3 or 4 for
encryption).
WPA-PSK/WPA-PSK2: This is a special mode
designed for home and small business users who do
not have access to network authentication servers. In
this mode, the user has to manually enter the starting
password in their access point or gateway, as well as in
each PC on the wireless network.
- Advanced Setting: In this field, you can setup more
advanced configuration.
Beacon Interval: This option defines time interval
between two images sent.
Preamble: A preamble is a signal used in wireless
environment to synchronize the transmitting timing
including Synchronization and Start frame delimiter.
Please NOTE that if you want to change the Preamble
type into Long or Short, please check the setting of
access point.
Authentication Type: Open System communicates
the key across the network. Shared Key allows
communication only with other devices with identical
WEP settings. The default setting is Both.
46
Network
Click the Network item in the left column to setup the LAN
configuration of your camera.
- TCP/IP: The items in this field display the information
of the wireless LAN, such as the Connection Mode
(Infrastructure or Ad-Hoc), Link, SSID, Channel,
Transmission Rate, and WEP Encryption.
IP Address Mode: This field provides your with three
options to select the IP Address Mode:
47
Fixed IPYou can select this option and enter the IP
address directly. The default settings are:
IP Address – 192.168.10.30
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
Dynamic Address (DHCP)If your network uses the
DHCP server, select this option. According to this
setting, the camera will be assigned an IP address from
the DHCP server automatically. Every time when the
camera starts up, please make sure that the DHCP
server is set to assign a static IP address to your
camera.
PPPoEIf your application requires a direct
connection from an ADSL modem through the
camera’s RJ-45 LAN port, click this option and enter
the User ID and Password into the respective boxes.
(You should have an ISP PPPoE account.) The camera
will get an IP address from the ISP as starting up.
DNS IP Address: DNS (Domain Name System)
server is an Internet service that translates domain
names into IP addresses. Enter at least one DNS IP
Address in this field.
Dynamic DNS: The Dynamic DNS service allows you
to alias a dynamic IP address to a static hostname in
any of the domains, allowing your computer to be
more easily accessed from various locations on the
Internet.
Second HTTP Port: The default port for
communication is via port 80, and you can change it
according to your network configuration. Select
Enable from the option and enter the desired port
number in the following box.
48
UPnP: UPnP is the architecture for pervasive peer-to-
peer network connectivity of intelligent appliances,
wireless devices, and PCs of all form factors. Check
the Enable option to enable the function of your
camera.
User
Click the User item in the left column to add, edit and delete
users for your camera.
- User Access Control:
Access Control: The administrator has the authority to
give permission for the privilege to control the device
49
to users by selecting Enable or Disable. The default
setting is No.
- Define Users: Use this field to add or delete users for
your camera.
Add User: Enter the user name in this box, and enter
the user’s password assigned by the administrator.
The maximum password length is 8 (printable ASCII).
The administrator has the authority to give permission
for the privilege to control the Upload/E-mail Video
control to the users by selecting Yes or No to activate
the Upload/E-mail Video.
To add a new user’s name, enter the necessary
information first and click the Add button.
- Delete User: Select the user you want to delete from the
pull-down menu, and then click the Delete button.
User List: This list displays the current users status of
your camera.
50
DateTime
Click the DateTime item in the left column to setup time and date
for your camera, providing correct information for the remote
users who might be thousands of miles away from the camera’s
location.
- Date & Time: You can set up time and date manually or
automatically by selecting the Synchronized with Time
Server option.
Synchronized with Time Server: Select this option
and the time will be based on GMT setting. The time
will be synchronized every 10 minutes. When
selecting this option, you have to enter the required
information in the following fields:
IP AddressEnter the IP Address of the Time Server
in this box.
ProtocolTwo options of NTP or Time are available
for your selection to link with the Time Server. The
default setting is NTP.
51
TimeZoneSelect the time zone for the region from
the pull-down menu.
Set Manually: Select this option to set the time
manually. The system administrator must enter the
date and time in the respective field manually.
52
53
Upload
Click the Upload item in the left column to setup configuration
for FTP server, time schedule and manual operation.
- FTP Server: This field contains the following six basic
settings for your FTP server.
54
Host Address: The IP Address of the target FTP
server.
Port Number: The standard port number for the FTP
server is Port 21, and it’s also the default setting. If
the FTP server uses a specific port, please confirm the
IT manager.
User Name: Enter the user name in this field.
Password: Enter the user password in this field to
login the FTP server.
Directory Path: Enter an existing folder name in this
field, and the images will be uploaded to the given
folder.
Passive Mode: This function depends on your FTP
server. Please check with your IT manager if the FTP
server uses passive mode. The default setting is No.
- Time Schedule: Select the “Enable upload video to FTP
server” option and enter the relevant information, such
as the schedule, video frequency and base file name.
Schedule: You can 1.) Choose Always to always
upload the video to FTP server, or 2.) Set the Schedule
to manage the uploading task. In the Schedule option,
you can set the Day and Time Period option.
Video Frequency: There are two ways to set the video
frequency: 1.) Set Auto/1/2/3 frames per second, or 2.)
Set the time in seconds for every frame.
Base File Name: Enter the file name to make sure that
the images could be saved as the base file name.
File: Since you may not upload only one image to the
FTP server, you can choose the filing rule, including
Overwrite, Date/Time Suffix, and set up the Sequence
Number.
55
- Manual Operation: When you click the Upload
Video button in view video screen, it will start to upload
the image. The setting refers to Base File Name and
File information above.
E-mail
Click the E-mail item in the left column to setup configuration
for E-mail account, time schedule and manual operation settings.
56
- E-mail Account: This field contains the following six
basic settings for your FTP server.
SMTP Server Address: SMTP (Simple Mail Transfer
Protocol) is a protocol for sending e-mail messages
between servers you need to input the mail server
address in this field.
Sender e-mail Address: Enter the e-mail address of
the user who will send the e-mail.
Receiver e-mail Address: Enter the e-mail address of
the user who will receive the e-mail.
User Name: Enter the user name in this field.
Password: Enter the user password in this field to
login receiver’s mail server.
- Time Schedule: Select the “Enable-mail video to e-mail
account” option to set schedule to send e-mail. Please
refer to the instruction in “Upload” section. The
Interval option is to define time interval between two
images sent.
- Manual Operation: When you click the E-mail Video
button in view video screen, it will start to e-mail image.
The Interval option is to define time interval between
two images sent.
57
Administration
J
Tools
The Tools window contains commands for restarting the camera.
Click Tools in the top menu bar and the Tools window will
appear as below:
FTP Server Test
Click the FTP Server Test item in the left column to test your
FTP server.
58
E-mail Test
Click the E-mail Test item in the left column to test your e-mail
account.
- Test E-mail Account: Click the Test button to test the
e-mail account you provided.
59
Reset
Do you really want to reset this device? Click the YES button
from this option, and you can restart the camera just like turning
the device off and on and saved settings are retained. If you do
not want to reset the camera, exit this window without clicking
YES.
Factory Reset
Do you really want to factory reset this device? Click the YES
button from this option, and you can resume all factory default
settings for the camera. If you do not want to restore the factory
settings, exit this window without clicking YES. Please NOTE
that you have to configure the network settings again after a
Factory Reset.
60
Firmware Upgrade
When new firmware is available, you can upgrade it through this
window. Click the Browse… button to point to the firmware
file (XXX.bin), and then click Update to start upgrading.
61
Backup
Click the Backup item in the left column to backup the current
configuration.
- Backup Device Configuration to File: Do you really
want to backup the configuration to file? Click the
Backup button from this option, and you can save the
current configuration to file.
- Restore Device Configuration from File: You can
resume the device configuration from saved file in the
62
computer. Click the Browse… button to point to the
file, and then click Restore to start restoring.
Administration
J
Help
The Help window provides the basic information of the camera.
Click Help in the top menu bar and the Help window will appear
as below:
63
About
Displays the camera’s model name and version.
Once the configuration is completed, click Home to return to
the Welcome screen and select the desired View Video option
either through ActiveX Mode or Java Mode as described in
the next section.
Then, position the camera to the desired location appropriately for
your purpose. Followed by adjustment of the camera focus, done
manually by turning the lens clockwise or anti-clockwise to the
desire image quality. Please refer to Appendix F for detailed
instruction.
64
View Video – ActiveX Mode
To view video images from the browser, click View Image –
ActiveX Mode from the Welcome screen to access the video
images from Internet Explorer as illustrated below:
Camera Name: The Camera name will be displayed when the
Camera Name field is entered in the Web Configuration setting
under Configuration.
In the View Video – ActiveX Mode, you are allowed to use the
Upload Video and E-mail Video options. Simply click the
desired selection ON or OFF to utilize the options for each of the
functions.
Camera Name
65
View Image – Java Mode
To view video images from the browser, click View Image –
Java Mode from the Welcome screen to access the video images
from Internet Explorer or Netscape browser as illustrated below:
Camera Name: The Camera name will be displayed when the
Camera Name field is entered in the Web Configuration setting
under Configuration.
Date and Time: The date/time of the camera will be displayed
here.
Camera Name
Date and Time
66
In the View Video – Java Mode, you are allowed to use the
Upload Video and E-mail Video options. Simply click the
desired selection ON or OFF to utilize the options for each of the
functions.
NOTE:
Please refer to the appendix on how to install ActiveX,
including 1.) install to the Web Server, and 2.) install to
your Local PC.
Please download Sun Microsystems Java Runtime
Environment (JRE) to view image in JAVA mode.
The administrator has the authority to set the upload
video function through the setting in the Upload option
under Configuration.
The administrator has the authority to set the e-mail
video function through the setting in the E-mail option
under Configuration.
67
7
IPVIEW PRO
This chapter describes the IPView PRO, which is a powerful
software application designed with a user-friendly interface for
ease of control and navigation requirements.
Installation
Step 1
Insert the CD-ROM into the CD-ROM drive to initiate the auto-
run program. The menu screen will appear as below:
68
Step 2
Click the IPView item to activate the InstallShield Wizard. Click
Next in the welcome screen.
Step 3
Read and accept the License Agreement; then, click Yes.
Step 4
69
Choose the destination location. If no specific requirement, leave
the default setting and click Next.
Step 5
The InstallShield Wizard starts to install the software, and the
progress bar indicates the installation is proceeding.
70
Step 6
Click Finish to complete the installation.
71
Getting Started
This section describes the User Interface of IPView Pro, with
detailed procedures for using the application.
To launch IPView Pro, click Start > Programs > IPView Pro >
IPView Pro. The main screen will appear as below:
NOTE: IPView Pro requires the system’s resolution setting up to 1024x768.
Please configure the resolution to 1024x768 or higher; otherwise, it may
shows incomplete screen when launching the program.
72
Item Feature
NO.
Item Description
1 Date/Time
Show current date/time.
2
Status Mode
Window
Show the camera’s status in this window.
Click the Change Status Mode button (
) on
the right lower corner of the window to change
the display mode:
Camera list mode Camera information mode
3 View Window
Show the camera’s view in this window.
4 Connect/
Disconnect
Click to connect/disconnect the camera.
5 Rotate image
angle
Click to rotate the image shown in the View
Window.
6 Snapshot
Click to capture a still image from the View
Window.
7 Audio ON/OFF
Click to turn on/off the camera’s audio.
8 Zoom Mode
Click to zoom in/out the image in the View
Window.
9
View Mode
Buttons
Select the view mode from these buttons.
Show one camera in View Window.
Show four cameras in View Window.
73
Show six cameras in View Window with
the first one as the major view.
Show eight cameras in View Window
with the first one as the major view.
Show nine cameras in View Window.
Show ten cameras in View Window with
the first two as the major views.
Show thirteen cameras in View Window
with the first one as the major view.
Show sixteen cameras in View Window.
Show the selected camera in full screen
view.
Enable displaying the video views in
circles.
10
Key Lock
Button
Click to lock/unlock the camera. When locked,
the user cannot operate any camera.
11 Power Button
Click to exit or minimize IPView Pro.
12 Record Button
Record video clip of the selected camera and
save it in the computer. The storage position can
be configured in System Configuration. When
you click the button, you can select Manual
Record, Schedule Record, or Motion Record.
13 Play Button
Play the recorded video file in the computer.
14
System
Configuration
Click to enter the System Configuration.
74
Using IPView Pro
Adding a Camera
To add a camera:
1. Click the System Configuration button to enter the System
Configuration.
If you are not sure of the camera’s IP address, you can click
Search to search the available camera(s) within the network.
75
2. Select the camera you want by highlighting it, and then click
Add Camera.
3. Click Save, and then click the System Configuration button to
return to View Window. The selected camera’s video will be
displayed now. You can click Save as to save the selected
cameras into the desired path and the selected cameras can be
reloaded by load button.
The camera found
within the network.
Click the
A
dd
Camera
button.
The camera is added.
76
Alternately, you can add a camera by entering the its IP address
directly:
4. Select the Input IP tab.
5. Enter the camera’s IP address (default: 192.168.10.30) and
Port (default: 80), and then click Add Camera.
6. Click Save, and then click the System Configuration button to
return to View Window. The selected camera’s video will be
displayed now.
Enter the camera’s
IP address and Port.
Click the
A
dd
Camera
button.
The camera is added.
77
Removing a Camera
To remove the camera from the list:
1.
Select the camera you want to remove.
2. Click Delete Camera.
78
Viewing a Camera
From the View Modes of the panel, you can select one-camera
mode or other modes to display your video. IPView Pro allows
a maximum of 16 cameras for viewing.
For example, if you use only one camera, select one-camera
mode (
), and the View Window will display the view as
figure 1.
If there are four cameras, select four-camera mode (
),
and the View Window will display the view as figure 2.
Figure 1 Figure 2
79
Recording Video
IPView Pro allows you to record the video clip and save it in your
computer through the following methods: Manual Record,
Schedule Record, and Motion Record.
When you click the Record button and select Manual Record, it
will start recording. Click the button again to stop. If you select
Schedule Record or Motion Record, the system will record the
video clip according to the settings in System Configuration.
Playing Recorded Video
The recorded video clips are saved in your computer, and can be
played using Windows Media Player. To start playback, simply
click the Play button on the panel, and the following dialog screen
will appear, allowing you to select the file to playback.
The folder that stores
the recorded file.
Select one file
to
p
la
y
back.
80
Select the recorded file in the computer, and then click OK.
Configuring the System
Clicking the System Configuration button on the panel allows you
to configure the system settings, and the System Configuration
Screen will appear in the View Window as shown below. Once
configured, click Save to save the settings, and then click the
System Configuration button again to exit configuration.
81
System Configuration Screen
Camera Configuration
In this field, you can add/delete the camera (as described in the
previous section). Also, you can configure the following settings:
Web Configuration
In the top low, selecting the Administration item will launch the
Web Configuration Utility in View Window.
82
You can configure these settings according to the description in
Chapter 5, Using the Camera. Click Back to exit the Web
Configuration Utility.
Motion Configuration-1
The Motion Configuration-1 item provides the commands for
motion detection control. Before configuring, you should select
one camera from the pull-down menu.
- Detect Region:
Full picture – When you select this option, the camera
will monitor the whole area.
Select one camera.
Select Custom re
g
ion.
Re
g
ion 1.
Re
g
ion 2.
83
Custom region – Click Add Region, and then use
mouse to draw an area in the view screen; when some
motion detected within the area, the camera starts
recording automatically. You can set multiple areas in
the view screen. Click Delete Region to remove the
area selected. Click Clear All Region to remove all
areas in the view screen.
-
Sensitivity Level: Move the slide bar to adjust the
sensitivity level for detecting motion to record video.
Motion Configuration-2
The Motion Configuration-2 item allows you to configure to the
alarm and e-mail setting.
84
-
Invoke Alarm: Select this option to enable alarm when
some motion detected by the system.
-
Send e-mail: When this option is checked, click the Mailing
Configuration in the left column to enter the required
information (see the following section).
-
Play music: You can use the music file to alert the event.
Click Browse music file to select the desired music, and set
the Interval time.
-
Trigger1 active: You can check this option to set the
Trigger-On holding time.
85
Tools
The Tools item allows you to configure to the alarm and e-mail
setting.
-
Reset: Restore the original setting of your camera. Do you
really want to reset this device? Click Yes in the pop-up
dialog box to confirm.
-
Factory Reset: Restore the factory default settings of the
camera. Do you really want to factory reset this device? Click
Yes in the pop-up dialog box to confirm.
-
Update Firmware: When new firmware is available, you
can upgrade it using this option. Click Browse to find the
firmware file, and then click Update.
86
Mailing Configuration
When Motion Detection function is enabled and the Send e-mail
option is checked, you should enter the required information in
the respective fields.
-
Mail Server: Enter the mail server address that is used to
send your e-mail.
-
Mail From/To: Enter the sender’s/receiver’s e-mail address.
-
Subject: Enter the title of the e-mail.
-
User Name/Password: Enter the user name/password to
login the mail server.
-
Interval Time: Enter a number in this box to setup the time
(in second) to send e-mail regularly.
87
Proxy Server
Check the Proxy Server option and enter the required settings in
the Address and Port boxes to enable and use the Proxy Server
function.
88
Recording Configuration
In this field, you can configure the storage settings.
-
Log Storage:
Reserved HDD Space For MS-Windows OS – You can
reserve 500 MB to 10000 MB hard disk space for the
program.
Each Recording File Size – If the recorded video files
reach the file size limit, video images will be recorded
into another file automatically. The available settings are
from 10 MB to 50 MB.
Storage List – The destination folder to save the
recorded video file can be specified here. Click Modify to
89
change the current path setting; click Add to add a new
destination folder; click Delete to remove a selected path
setting. Please note that you are not allowed to delete a
path setting if there is only one setting in the list.
-
Recycle: You can check this option to clear the files when
the unreserved space of your hard disk is filled. The available
settings are from 200 MB to 50000 MB.
-
Resume last time’s state of recording: You can check this
option to store the recording state, and resume the recording
state on the next time you record.
Schedule-Recording Configuration
This recording function will work after you have enabled
respective settings in the Schedule mode. The recording schedule
can be defined by Date Mode or Week Mode.
90
-
Date Mode: First, select the camera desired from the pull-
down menu. Then, setup the time in the Start/Stop fields.
Click Add to add the recording schedule to the list. Click Save
to save the settings.
91
-
Week Mode: First, select the camera desired from the pull-
down menu. Then, setup the time in the Start/Stop fields, and
select the weekday from the buttons. Click Add to add the
recording schedule to the list. Click Save to save the settings.
Others
When multiple cameras connected, this option allows the system
to display these views as the main view in circles according to
your time settings. The range of Time interval of scan is from 1
to 20 seconds.
Weekda
y
buttons.
92
Log List
This filed displays the user(s) information, which includes the
Date, MAC address, and the brief description of events.
93
Account
This filed allows you to set the Admin ID and Admin Password.
You can also check the Login password check option to secure
your camera by checking the login password.
94
95
About
This filed provides information of the software application.
96
8
APPENDIX
A Frequently Asked Questions
Camera Features
Q: What is an Internet Camera Server?
A: The Camera is a standalone system connecting directly to an
Ethernet or Fast Ethernet network and supported by the wireless
transmission based on the IEEE 802.11b/g standard. It is
different from the conventional PC Camera, the Camera is an all-
in-one system with built-in CPU and web-based solutions
providing a low cost solution that can transmit high quality video
images for monitoring. The Camera can be managed remotely,
accessed and controlled from any PC/Notebook over the Intranet
or Internet via a web browser.
Q: What is the maximum number of users that can be allowed to
access the Camera simultaneously?
A: Maximum number of users that can log onto the Camera at the
same time is 64. Please keep in mind the overall performance of
97
the transmission speed will slow down when many users are
logged on.
Q: What algorithm is used to compress the digital image?
A: The Camera utilizes the JPEG image compression technology
providing high quality images for users. JPEG is adopted since it
is a standard for image compression and can be applied to various
web browser and application software without the need to install
extra software.
Q: Can I change the wireless antenna attached to the Wireless
Camera?
A: The wireless antenna can be changed for a variety of reasons
such as extending the wireless transmission range, however,
please consult authorized distributors before attempting as the
connectors must be SMA connector type.
Q: What is the wireless transmission range for the Wireless
Camera?
A:
Generally the wireless distance can go up to 100 meters
indoors and up to 300 meters outdoors. The range is limited
by the number of walls, ceilings, or other objects that the
wireless signals must pass through. Typical ranges vary
depends on the types of materials and background Radio
Frequency (RF) noise in your home or business and the
configuration setting of your network environment.
Camera Installation
Q: Can the Camera be used out-doors?
98
A: The Camera is not weatherproof. It needs to be equipped with
a weatherproof case to be used outdoors and it is not
recommended.
Q: What network cabling is required for the Camera?
A: The Camera uses Category 5 UTP cable allowing 10 Base-T
and 100 Base-T networking.
Q: Can the Camera be setup as a PC-Cam on the computer?
A: No, the Camera is an Camera used only on Ethernet and Fast
Ethernet network and wireless transmission (Wireless only for
TV-IP100W-N).
Q: Can the Camera be connected on the network if it consists of
only private IP addresses?
A: The Camera can be connected to LAN with private IP
addresses.
Q: Can the Camera be installed and work if a firewall exists on
the network?
A: If a firewall exists on the network, port 80 is open for ordinary
data communication. However, since the Wireless Camera
transmits image data, the default port 8481 is also required.
Therefore, it is necessary to open port 8481 of the network for
remote users to access the Camera.
99
B PING Your IP Address
The PING (Packet Internet Groper) command can determine
whether a specific IP address is accessible by sending a packet to
the specific address and waiting for a reply. It can also provide a
very useful tool to confirm if the IP address conflicts with the
Wireless Camera over the network.
Follow the step-by-step procedure below to utilize the PING
command. However, you must disconnect the Wireless Camera
from the network first.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Wireless
Camera.
The succeeding replies as illustrated below will provide useful
explanation to the cause of the problem with the Wireless Camera
IP address.
100
C Trouble Shooting
Q: I cannot access the Camera from a web browser.
A1: The possible cause might be the IP Address for the
Camera is already being used by another device. To correct
the possible problem, you need to first disconnect the Camera
from the network. Then run the PING utility (follow the
instructions in Appendix B - PING Your IP Address).
A2: Another possible reason is the IP Address is located on a
different subnet. To fix the problem, run the PING utility
(follow the instructions in Appendix B - PING Your IP
Address). If the utility returns “no response” or similar, the
finding is probably correct, then you should proceed as
follows:
In Windows 95/98/2000 and Vista, double check the IP
Address of the Wireless Camera is within the same subnet as
your workstation.
Click “Start”, “Setting”, “Control Panel”, and the “Network”
icon. Select TCP/IP from the “Network” dialog box and from
the “TCP/IP Properties” dialog box click “Specify an IP
address”.
If the Camera is situated on a different subnet than your
workstation, you will not be able to set the IP address from
this workstation. To verify make sure the first 3 sections of
the IP address of the Camera corresponds to the first 3
sections of the workstation. Therefore the IP address of the
Wireless Camera must be set from a workstation on the same
subnet.
101
A3: Other possible problems might be due to the network
cable. Try replacing your network cable. Test the network
interface of the product by connecting a local computer to the
unit, utilizing a standard Crossover (hub to hub) Cable. If the
problem is not solved the Camera might be faulty.
Q: Why does the Power LED not light up constantly?
A: The power supply used might be at fault. Confirm that
you are using the provided power supply DC 5V for the
camera and verify that the power supply is well connected.
Q: Why does the Link LED not light up properly?
A1: There might be a problem with the network cable. To
confirm that the cables are working, PING the address of a
know device on the network. If the cabling is OK and your
network is reachable, you should receive a reply similar to the
following (…bytes = 32 time = 2 ms).
A2: The network device utilized by the camera is not
functioning properly such as hubs or switches. Confirm the
power for the devices are well connected and functioning.
A3: The wireless connection might be at fault. In ad-hoc
mode make sure the wireless camera’s wireless channel and
SSID is set to match the PC/Notebook wireless channel and
SSID for direct communication.
Under infrastructure mode make sure the SSID on the
PC/Notebook and the Wireless Camera must match with the
access point’s SSID.
102
Q: Why does the Wireless Camera work locally but not
externally?
A1: Might be caused from the firewall protection. Need to
check the Internet firewall with your system administrator.
A2: The default router setting might be a possible reason.
Need to double check if the configuration of the default router
settings is required.
Q: Why does a series of broad vertical white line appear through
out the image?
A: A likely issue is that the CMOS sensor becomes
overloaded when the light source is too bright such as direct
exposure to sunlight or halogen light. You need to reposition
the Wireless Camera into a more shaded area immediately as
this will damage the CMOS sensor.
Q: There is bad focus on the camera, what should be done?
A1: The focus might not be correctly adjusted for the line of
sight. You need to adjust the camera focus manually as
described in Adjust Camera Focus.
A2: There is no adaptor fitted with your C-type lens. If you
have previously changed the supplied CS-type lens, you may
have unintentionally installed a C-type lens without fitting the
adaptor first.
Q: Noisy images occur how can I solve the problem?
A1: The video images might be noisy if the Wireless Camera
is used is a very low light environment. To solve this issue
you need more lighting.
103
A2: There might be wireless transmission interference make
sure there are no other wireless devices on the network that
will affect the wireless transmission.
Q: There is poor image quality, how can I improve the image?
A1: A probable cause might be the incorrect display
properties configuration for your desktop. You need to open
the Display Properties on your desktop and configure your
display to show at least 65’000 colors for example at least 16-
bit.
NOTE: Applying only 16 or 256 colors on your computer will
produce dithering artifacts in the image.
A2: The configuration on the Wireless Camera image display
is incorrect. Through the Web Configuration Image section
you need to adjust the image related parameter for improve
images such as brightness, contrast, hue and light frequency.
Please refer to the Web Configuration section for detail
information.
Q: There are no images available through the web browser?
A: The ActiveX might be disabled. If you are viewing the
images from Internet Explorer make sure ActiveX has been
enabled in the Internet Options menu. Alternatively, you can
use the Java Applet (JRE) for viewing the required images.
104
D Time Zone Table
105
106
E Xplug Control Installation
Installation to Web Server
1. Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2. Setting (Configuration):
From the Web Configuration menu select “System” and
under the “Loading ActiveX From” input web server
location
(http://www.web server location.com/
).
Once the settings are completed, the user now is able to access the
Camera from the web browser by selecting the image view –
ActiveX mode.
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0. It must be
installed to a Public Domain with Fixed IP address.
107
Installation to Local PC
Insert the CD-ROM into the CD-ROM drive to initiate the auto-
run program. Once completed, a menu screen will appear as
below:
To install Xplug Control, click the “Xplug Control" button to
activate the installation procedure for the plug-in program.
Once executed, a prompt will appear requesting the input of the
desired language selection. Make the desired selection and click
OK” to continue.
108
The Welcome screen will appear. Click the “Next” button to
proceed with the installation.
The License Agreement prompt will appear as below. Read the
details carefully and click the “Yes” button to continue with the
installation procedure.
109
Click the “Finish” button to complete Setup of the Xplug Control
Utility program for the Wireless Camera.
110
F Adjust Camera Focus
To adjust the focus of the lens, you need to turn the lens slowly in
either clockwise or anti-clockwise direction until the desired
image appears. DO NOT over turn the lens in either of the
directions, as it will be out of focus.
NOTE: You can further adjust the Wireless Camera's image
quality through System Administration – Image of Web
Configuration. Please refer to Web Configuration section for
further details.
Warning
Direct exposure to sunlight may cause permanent damage to the
CMOS sensor. Therefore do not expose the Internet Camera’s lens
directly to sunlight. When operation is required in glaring light
environment, it is recommended to use an iris lens.
The Internet Camera is designed for indoor usage and if your
application requires prolong exposure to sunlight, a sun visor is
recommended to protect the Internet Camera.
111
G Specification
Video specification
Resolution: 160 x 120, 320 x 240, 640 x
480 pixel
Sensor: Color CMOS sensor
Lens: f: 6.0 mm, F: 1.8
Gain control: Automatic
Exposure: Automatic
White Balance: Automatic
Image (Video Setting)
Image compression: JPEG
Frame rate: 30fps @ QCIF, 25fps @ CIF,
10fps @ VGA
Compression Rate selection: 5 levels: Very low/Low/
Middle/High/Very high
Frame rate setting: 1, 5, 7, 15, 20, Auto (depends
on the video format)
Video resolution: 160x120, 320x240, 640x480
Hardware Interface
LAN Connector: One RJ-45 port, 10/100M
auto-sensed, Auto-MDIX
Wireless LAN: Built-in 802.11g wireless
LAN
Communication protocol: HTTP, FTP, TCP/IP, UDP,
ARP, ICMP, BOOTP, DHCP,
PPPoE, SMTP, DDNS, UPnP
112
CPU: RDC R2880
RAM: 8MB
Flash ROM: 2MB
OS: RTOS
Power Supply: DC 5V, switching type
Power consumption: 5 Watt (1000mA x 5V)
LED Indicator: Power LED (Blue)
Activity LED (Orange)
Software
Browser: Internet Explorer 5.0 or above;
Netscape 6.0 or above
Application Software: IPView PRO
OS supported: Microsoft Windows 98SE/ME/
2000/XP/Vista, Windows NT4.0
Operating environment
Operating temperature: 5
O
C ~ 40
O
C
Storage temperature: -25
O
C ~ 50
O
C
Humidity: 5% ~ 95%, non-condensing
EMI
FCC, CE
113
H Glossary of Terms
NUMBERS
10BASE-T
10BASE-T is Ethernet over UTP Category III,IV, or V
unshielded twisted-pair media.
100BASE-TX
The two-pair twisted-media implementation of
100BASE-T is called 100BASE-TX.
802.11g
An IEEE standard for wireless local area networks. It
offers transmissions speeds at up to 54 Mbps in the 2.4-
GHz band.
A
Access point
It is the hardware interface between a wireless LAN
and a wired LAN. The access point attaches to the
wired LAN through an Ethernet connection.
Applet
Applets are small Java (JRE)
p
rograms that can be
embedded in an HTML page. The rule at the moment is
that an applet can only make an Internet connection to
the computer form that the applet was sent.
ASCII
American Standard Code For Information Interchange,
it is the standard method for encoding characters as 8-
it sequences of binary numbers, allowing a maximum
of 256 characters.
114
ARP
Address Resolution Protocol. ARP is a protocol that
resides at the TCP/IP Internet layer that delivers data
on the same network by translating an IP address to a
physical address.
AVI
Audio Video Interleave, it is a Windows platform audio
and video file type, a common format for small movies
and videos.
B
BOOTP
Bootstrap Protocol is an Internet protocol that can
automatically configure a network device in a diskless
workstation to give its own IP address.
C
Communication
Communication has four components: sender, receiver,
message, and medium. In networks, devices and
application tasks and processes communicate messages
to each other over media. They represent the sender and
receivers. The data they send is the message. The
cabling or transmission method they use is the medium.
Connection
In networking, two devices establish a connection to
communicate with each other.
D
DHCP
Dynamic Host Configuration Protocol was developed
by Microsoft a protocol for assigning dynamic IP
115
addresses to devices on a network. With dynamic
addressing, a device can have a different IP address
every time it connects to the network. In some systems,
the device's IP address can even change while it is still
connected. DHCP also supports a mix of static and
dynamic IP addresses. This simplifies the task for
network administrators because the software keeps
track of IP addresses rather than requiring an
administrator to manage the task. This means a new
computer can be added to a network without the hassle
of manually assigning it a unique IP address. DHCP
allows the specification for the service provided by a
router, gateway, or other network device that
automatically assigns an IP address to any device that
requests one
DNS
Domain Name System is an Internet service that
translates domain names into IP addresses. Since
domain names are alphabetic, they're easier to
remember. The Internet however, is really based on IP
addresses every time you use a domain name the DNS
will translate the name into the corresponding IP
address. For example, the domain name
www.network_camera.com might translate to
192.167.222.8.
E
Enterprise
network
An enterprise network consists of collections of
networks connected to each other over a geographically
dispersed area. The enterprise network serves the needs
of a widely distributed company and operates the
company’s mission-critical applications.
116
Ethernet
The most popular LAN communication technology.
There are a variety of types of Ethernet, including 10
Mbps (traditional Ethernet), 100 Mbps (Fast Ethernet),
and 1,000 Mbps (Gigabit Ethernet). Most Ethernet
networks use Category 5 cabling to carry information,
in the form of electrical signals, between devices.
Ethernet is an implementation of CSMA/CD that
operates in a bus or star topology.
F
Fast Ethernet
Fast Ethernet, also called 100BASE-T, operates at 10
or 100Mbps per second over UTP, STP, or fiber-optic
media.
Firewall
Firewall is considered the first line of defense in
protecting
p
rivate information. For better security, data
can be encrypted. A system designed to prevent
unauthorized access to or from a private network.
Firewalls are frequently used to prevent unauthorized
Internet users from accessing private networks
connected to the Internet, especially Intranets all
messages entering or leaving the intranet pass through
the firewall, which examines each message and blocks
those that do not meet the specified security criteria.
G
Gateway
A gateway links computers that use different data
formats together.
Group
Groups consist of several user machines that have
similar characteristics such as being in the same
department.
117
H
HEX
Short for hexadecimal refers to the base-16 number
system, which consists of 16 unique symbols: the
numbers 0 to 9 and the letters A to F. For example, the
decimal number 15 is represented as F in the
hexadecimal numbering system. The hexadecimal
system is useful because it can re
p
resent every byte (8
its) as two consecutive hexadecimal digits. It is easier
for humans to read hexadecimal numbers than binary
numbers.
I
IEEE
Institute of Electrical and Electronic Engineers.
Intranet
This is a private network, inside an organization or
company, that uses the same software you will find on
the public Internet. The only difference is that an
Intranet is used for internal usage only.
Internet
The Internet is a globally linked system of computers
that are logically connected based on the Internet
Protocol (IP). The Internet provides different ways to
access private and public information worldwide.
Internet
address
To participate in Internet communications and on
Internet Protocol-based networks, a node must have an
Internet address that identifies it to the other nodes. All
Internet addresses are IP addresses
IP
Internet Protocol is the standard that describes the
layout of the basic unit of information on the Internet
(the packet) and also details the numerical addressing
118
format used to route the information. Your Internet
service provider controls the IP address of any device it
connects to the Internet. The IP addresses in your
network must conform to IP addressing rules. In
smaller LANs, most people will allow the DHCP
function of a router or gateway to assign the IP
addresses on internal networks.
IP address
IP address is a 32-
b
inary digit number that identifies
each sender or receiver of information that is sent in
packets across the Internet. For example 80.80.80.69 is
an IP address, it is the closet thing the Internet has to
telephone numbers. When you “call” that number,
using any connection methods, you get connected to
the computer that “owns” that IP address.
ISP
Internet Service Provider, is a company that maintains
a network that is linked to the Internet by way of a
dedicated communication line. An ISP offers the use
of its dedicated communication lines to companies or
individuals who can’t afford the high monthly cost for
a direct connection.
J
JAVA
Java is a programming language that is specially
designed for writing programs that can be safely
downloaded to your computer through the Internet
without the fear of viruses. It is an object-oriented
multi-thread programming best for creating applets and
applications for the Internet, Intranet and other
complex, distributed network.
119
L
LAN
Local Area Network a computer network that spans a
relatively small area sharing common resources. Most
LANs are confined to a single building or group of
buildings.
N
NAT
etwork Address Translator generally applied by a
router, that makes many different IP addresses on an
internal network appear to the Internet as a single
address. For routing messages properly within your
network, each device requires a unique IP address. But
the addresses may not be valid outside your network.
AT solves the problem. When devices within your
network request information from the Internet, the
requests are forwarded to the Internet under the router's
IP address. NAT distributes the responses to the proper
IP addresses within your network.
Network
A network consists of a collection of two or more
devices, people, or components that communicate with
each other over physical or virtual media. The most
common types of network are:
LAN – (local area network): Computers are in close
distance to one another. They are usually in the same
office space, room, or building.
WAN – (wide area network): The computers are in
different geographic locations and are connected by
telephone lines or radio waves.
120
NWay Protocol
A network protocol that can automatically negotiate the
highest possible transmission speed between two
devices.
P
PING
Packet Internet Groper, a utility used to determine
whether a specific IP address is accessible. It functions
y sending a packet to the specified address and waits
for a reply. It is primarily used to troubleshoot Internet
connections.
PPPoE
Point-to-Point Protocol over Ethernet. PPPoE is a
specification for connecting the users on an Ethernet to
the Internet through a common broadband medium,
such as DSL or cable modem. All the users over the
Ethernet share a common connection.
Protocol
Communication on the network is governed by sets of
rules called protocols. Protocols provide the guidelines
devices use to communicate with each other, and thus
they have different functions. Some protocols are
responsible for formatting and presenting and
resenting data that will be transferred from file server
memory to the file server’s net work adapter Others are
responsible for filtering information between networks
and forwarding data to its destination. Still other
rotocols dictate how data is transferred across the
medium, and how servers respond to workstation
requests and vice versa. Common network protocols
responsible for the presentation and formatting of data
for a network operating system are the Internetwork
Packet Exchange (IPX) protocol or the Internet
Protocol (IP). Protocols that dictate the format of data
121
for transferors the medium include token-
p
assing and
Carrier Sense Multiple Access with Collision Detection
(CSMA/CD),implemented as token-ring, ARCNET,
FDDI, or Ethernet. The Router Information Protocol
(RIP),a part of the Transmission Control
Protocol/Internet Protocol (TCP/IP) suite, forwards
ackets from one network to another using the same
network protocol.
R
RARP
Reverse Address Resolution Protocol, a TCP/IP
rotocol that allows a physical address, such as an
Ethernet address, to be translated into an IP address.
RJ-45
RJ-45 connector is used for Ethernet cable
connections.
Router
A router is the network software or hardware entity
charged with routing packets between networks.
S
Server
It is a simple computer that
p
rovides resources, such as
files or other information.
SMTP
The Simple Mail Transfer Protocol is used for Internet
mail.
SNMP
Simple Network Management Protocol. SNMP was
designed to provide a common foundation for
managing network devices.
122
Station
In LANs, a station consists of a device that can
communicate data on the network. In FDDI, a station
includes both physical nodes and addressable logical
devices. Workstations, single-attach stations, dual-
attach stations, and concentrators are FDDI stations.
Subnet mask
In TCP/IP, the bits used to create the subnet are called
the subnet mask.
T
(TCP/IP)
Transmission Control Protocol/Internet Protocol is a
widely used transport protocol that connects diverse
computers of various transmission methods. It was
developed y the Department of Defense to connect
different computer types and led to the development of
the Internet.
Transceiver
A transceiver joins two network segments together.
Transceivers can also be used to join a segment that
uses one medium to a segment that uses a different
medium. On a 10BASE-5 network, the transceiver
connects the network adapter or other network device
to the medium. Transceivers also can be used on
10BASE-2 or 10BASE-T networks to attach devices
with AUI ports.
U
UDP
The User Datagram Protocol is a connectionless
protocol that resides above IP in the TCP/IP suite
123
ULP
The upper-layer protocol refers to Application Layer
protocols such as FTP,SNMP, and SMTP.
User Name
The USERNAME is the unique name assigned to each
person who has access to the LAN.
Utility
It is a program that performs a specific task.
UTP
Unshielded twisted-
p
air. UTP is a form of cable used
y all access methods. It consists of several pairs of
wires enclosed in an unshielded sheath.
W
WAN
Wide-Area Network. A wide-area network consists of
groups of interconnected computers that are separated
y a wide distance and communicate with each other
via common carrier telecommunication techniques.
Windows
Windows is a graphical user interface for workstations
that use DOS.
Workgroup
A workgroup is a group of users who are physically
located together and connected to the same LAN, or a
group of users who are scattered throughout an
organization but are logically connected by work and
are connected to the same network group.
Workstations
Workstation refers to the intelligent computer on the
user’s desktop. This computer may be an Intel-
b
ased
PC, a Macintosh, or a UNIX-
b
ased workstation. The
workstation is any intelligent device a user works from.
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship,
under normal use and service, for the following lengths of time from the date of
purchase.
TV-IP100-N and TV-IP100W-N– 3 Years Warranty
If a product does not operate as warranted above during the applicable warranty
period, TRENDnet shall, at its option and expense, repair the defective product
or part, deliver to customer an equivalent product or part to replace the defective
item, or refund to customer the purchase price paid for the defective product.
All products that are replaced will become the property of TRENDnet.
Replacement products may be new or reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or
memory data of customer contained in, stored on, or integrated with any
products returned to TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt
to service the product by any unauthorized service center. This warranty is
voided if (i) the product has been modified or repaired by any unauthorized
service center, (ii) the product was subject to accident, abuse, or improper use
(iii) the product was subject to conditions more severe than those specified in the
manual.
Warranty service may be obtained by contacting TRENDnet office within the
applicable warranty period for a Return Material Authorization (RMA) number,
accompanied by a copy of the dated proof of the purchase. Products returned to
TRENDnet must be pre-authorized by TRENDnet with RMA number marked on
the outside of the package, and sent prepaid, insured and packaged appropriately
for safe shipment.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT
OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE
REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES
ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER
PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION
WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF
TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS
TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED
DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS
TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING,
OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY
LAW TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR
LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT
OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION
OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE
PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER
OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY
REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL
PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the
state of California.
AC/DC Power Adapter, Cooling Fan, Power Supply and Cables carry 1 Year
Warranty
100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trendnet TV-IP100 W-N wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trendnet TV-IP100 W-N

Trendnet TV-IP100 W-N Kurzanleitung - Deutsch - 13 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info