- 21 -
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP address of your
computer. When you connect the camera to your computer directly to
proceed with configuration of the camera, you need to set up the IP
addresses to be in the same segment for the two devices to communicate.
1. On your computer, click Start > Control Panel to open the Control
Panel window.
2. Double-click Network Connection to open the Network Connection
window.
3. Right-click Local Area Connection and then click Properties from
the shortcut menu.
4. When the Local Area Connection Properties window appears, select the
General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to bring
up the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the camera,
select the Use the following IP address option. Then, enter an IP
address into the empty field.
7. When you are finished, click OK.
