Bedienungsanleitung Trendnet TV-IP300 (Seite 17 von 52) (Englisch)

541199

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

settings are Infrastructure mode and Ad-Hoc mode. The

default setting is Infrastructure.

- Channel: The pull-down menu provides the wireless channel

for communication. A "channel" is a range of frequencies to

be used in communication between the camera and access

point (Infrastructure mode) or the camera and computer (Ad-

hoc mode). Select the appropriate channel from the list

provided depending on the regulatory region where the unit is

sold. The default setting is channel 6.

- TX rate: This option is used to set the current transmitting

rate. The speed should be set to Auto rate to optimize

performance and range, which will adjust the transfer speed

for best performance and longest range automatically.

- Preamble: You can set the length of preamble by choosing

Long preamble or Short preamble from the pull-down menu.

- Data Encryption: Wireless network communications can be

intercepted easily. Enable this option will help you protect

your wireless network. When enabled, choose the proper

settings in the following options, including Auth mode, Key

length, and Key format.

To enable WEP Encryption, you should decide the encryption

format first by selecting the ASCII or HEX in Key format

option, and then input the WEP key.

ASCII input format:

ASCII format causes each character you type to be

interpreted as an eight-bit value. All unaccented upper- and

lower-case Western European characters that can be input

through your keyboard's typing zone are valid. To setup a

64-bit WEP key, input 5 ASCII characters. For example,

‘12345’. To setup a 128-bit WEP key, input 13 ASCII

characters. For example, ‘1234567890123’. These

character counts result in bit counts of 40 and 104

respectively; the camera will automatically pad your input to

a bit count of 64 or 128.

HEX input format:

Hex format causes each pair of characters you type to be

interpreted as an eight-bit value in hexadecimal (base 16)

notation. Only the digits 0 through 9 and the letters A

through F (in upper or lower case) are valid. To setup a 64-

bit WEP key, input 10 HEX format. For example,

‘3132333435’, which is the same with ASCII input ‘12345’.

To setup an 128-bit WEP key, input 26 HEX format. For

example, ‘31323334353637383930313233’, which is the

same with ASCII input ‘1234567890123’. These character

counts result in bit counts of 40 and 104, respectively; the

camera will automatically pad your input to a bit count of 64

or 128.

Network

This option allows you to set up networking configuration. The

default port for communication is via port 80 (HTTP), and you

can change it according to your network configuration.

- SMTP: If you enable the Send snapshot image by email

function in the Application window, you have to configure

the following settings in this field.

• SMTP (mail) server 1/2 – You must enter the mail

server address in the field.

• Recipient email address 1/2 - Enter the e-mail address

of the user who will receive the e-mail.

• Return email address – Enter the e-mail address of the

user who will send the e-mail.

- FTP: If you enable the Upload snapshot image to FTP

server function in the Application window, you have to

configure the following settings in this field.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TV-IP300 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TV-IP300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info