- 22 -
Auto Patrol button controls the camera to automatically scan
the preset positions once. Click Stop to stop patrolling.
Click the Number button (1~8) to move the camera lens to the
preset position immediately.
To set up the preset positions, move the camera lens by clicking
the Left/Right/Up/Down buttons to the desired position first,
then select the number (1~8) from the pull-down list and click
the Apply button. You can enter a descriptive name for the
assigned position in the text box to identify it easily.
Function Buttons
– Use these buttons to control the audio, video,
and trigger functions.
Manual Record allows you to record and save a video clip.
Snapshot allows you to capture and save a still image.
Browse allows you to assign the destination folder to store the
video clips and still images.
Trigger Out allows you to trigger on/off the GPIO output
manually.
3.3 Configuring the IP Address of the PC
If you are failed to access to the camera, please check the IP address of
your computer. When you connect the camera to your computer directly
to proceed with configuration of the camera, you need to set up the IP
addresses to be in the same segment for the two devices to
communicate.
