541060
16
Zoom out
Zoom in
Vorherige Seite
1/45
Nächste Seite
TV-IP501P Internet Camera User Manual
15
Browser Configuration
The camera is easy to use and manage using a web browser or the IPViewPro 2.0 software to access the
camera’s live video display, and configuration software. Check and make sure the computer can access
and use the camera before placing it in the location where it will be used, especially if it is mounted to a
ceiling or other difficult to access area.
For the initial setup, use the Setup Wizard program located on the CD-ROM included with the camera.
Use the Setup Wizard to assign an IP address and other network settings. Once the camera has an IP
address, follow the instructions below to access the camera’s web management interface used to
manage the camera and for video display.
Accessing the Camera Video Display
If the camera is used on a network with an active DHCP server, the camera will detect it and obtain an IP
address. If you are using the camera on a network with a DHCP server it is necessary to first determine
what the IP address of camera is. To do this, follow the instructions in the Quick Installation Guide to
launch the Setup Wizard software utility used with the network camera.
NOTE: If your network uses DHCP or has an active DHCP server running, use the Setup
Wizard utility on the installation CD-ROM shipped with the camera to first access the
camera. Once it is accessed, you can change the IP address or continue to use the DHCP
assigned address as preferred.
If your network does not use a DHCP server, the camera will use a default IP address of 192.168.10.30.
Use this address to access the web-based management software. Use a web browser and type in http://
followed by the default IP address, 192.168.10.30 in the address bar of the browser and press the Enter
key. The URL in the address bar should read: http://192.168.10.30
If the login dialog does not appear, check the proxy server settings on your browser.
NOTE: The wrong proxy server settings on your browser can prevent connection to the web
manager. If you are having trouble connecting to the camera, configure the proxy settings to
bypass the proxy server or disable use of proxy servers and try to connect again
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trendnet TV-IP501P wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trendnet TV-IP501P

Trendnet TV-IP501P Kurzanleitung - Deutsch - 17 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info