Bedienungsanleitung Trendnet TV-IP600 (Seite 12 von 14) (Deutsch)

541132

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Q1:

A1:

Q2:

A2:

Q3:

A3:

Q4:

A4:

Q5:

A5:

Q6:

A6:

Q7:

A7:

SetupWizard is unable to detect my camera. What should I do?

First, verify that you have followed all the steps in the Section 2: Hardware Installation

and Configuration. Second, disable any software firewall programs such as ZoneAlarm or

Norton Internet Security. If you are using Windows XP or Windows Vista, disable the built in

firewall. Third, click on Re-Scan in the SetupWizard.

I do not have a DHCP server or DHCP is disabled on my network and I am unable to

configure the TV-IP600/TV-IP600W. What should I do?

First, go to the TCP/IP settings on your computer and assign a static IP address on your

computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of

the TV-IP600/TV-IP600W is 192.168.10.30, do not assign a static IP address of

192.168.10.30 on your computer's network adapter. Second, open Internet Explorer and

enter http://192.168.10.30 into the address bar.

The Image is blurry. How can I adjust the focus on the IP Camera?

You can adjust the IP Camera's focus by rotating the lens.

Live video does not appear when I click on Live View. What should I do?

First, make sure that you are using a browser that supports ActiveX or Java. Second,

when viewing in ActiveX mode, make sure that you added ActiveX control. See steps 25 to

26 in Section 2: Hardware Installation and Configuration. Third, when viewing in Java

mode, make sure that you have the latest version of Java installed. Please go to

http://www.java.com to download the latest version of Java.

How do I connect the TV-IP600/TV-IP600W to my wireless router or access point?

Make sure that you configure the camera to have the same SSID, encryption mode and

key (if enabled). Follow the instructions in section 2: Hardware Installation and

Configuration to configure the camera with the SSID and encryption key

After I successfully configured the TV-IP600/TV-IP600W to match my wireless network

settings, I can not connect to the camera.

First, verify that the wireless settings match your wireless network settings. Second,

make sure to disconnect the Ethernet cable from the camera and verify that the LINK LED is

blinking red.

I forgot my password. What should I do?

Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.

This will return settings back to factory defaults. Open up the SetupWizard program to find

out the IP address of the camera (see step 11 in Section 2: Hardware Installation and

Configuration. If you do not have a DHCP server on your network, the default IP address is

192.168.10.30. The default administrator ID and password is admin.

If you still encounter problems or have any questions regarding the TV-IP600/TV-IP600W, please

contact TRENDnet's Technical Support Department.

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TV-IP600 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TV-IP600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info