Bedienungsanleitung Trendnet TV-IP612WN (Seite 10 von 17) (Deutsch)

541127

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu

does not appear automatically. What should I do?

For Windows 7, if the installation menu does not appear automatically, click on the

Windows Icon on the bottom left hand corner of the screen,, click the “Search programs

and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter

assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard .

2. For Windows Vista, if the installation menu does not appear automatically, click Start, click

the Start Search box, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter

assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.

3. For Windows XP/2000, if the window does not appear automatically, click Start, click Run

and type D:\autorun.exe where “D” in “D:\autorun.exe” is the letter assigned to your

CD-ROM Drive, and then press the ENTER key on your keyboard.

2. Setup Wizard is unable to detect my camera. What should I do?

Verify that you have followed all the steps in Section 2: Hardware Installation.

2. Disable any software firewall programs such as ZoneAlarm or Norton Internet Security. If

you are using Windows 7, Vista or XP disable the built in firewall.

3. Click on Rescan.

4. Take a pin or paper clip. Then press on the Reset button on the back on the IP Camera

for 10 seconds, then let go.

3. I do not have a DHCP server or DHCP is disabled on my network and I am unable to

configure the TV-IP612WN. What should I do?

1. Go to the TCP/IP settings on your computer and assign a static IP address on your

computer's network adapter in the subnet of 192.168.10.x. Since the default IP address of

the TV-IP612WN is 192.168.10.30, do not assign a static IP address of 192.168.10.30 on

your computer's network adapter.

2. Open Internet Explorer and enter into the address bar.

4. The Image is blurry. How can I adjust the focus on the Internet camera?

If you have manual focus enabled in the IP camera's browser configuration, you can press

the plus or minus sign. Selecting auto focus will automatically adjust the focus on the IP

camera.

5. When I click on Live View the image does not load?

1. Make sure that you are using a browser that supports Active X.

2. Make sure that ActiveX is installed. See steps 20 to 23 in Section 2: Hardware

Installation and Configuration.

6. How do I connect the TV-IP612WN to my wireless router or access point?

Make sure that you configure the camera to have the same SSID, encryption mode and key

(if enabled). Follow the instructions in section 2 to configure the camera with the SSID and

encryption key.

http://192.168.10.30

Troubleshooting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TV-IP612WN Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TV-IP612WN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info