Bedienungsanleitung Triax DVB 168S (Seite 42 von 48) (Deutsch, Englisch)

485390

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

DVB 168 S (GB)-18 050908

www.triax.com

Note on Network Search:

In this search mode, the receiver first collects the network information first from the TP you

selected. Then an Auto Search takes place to research all the channels in that network. The

number of searched channels may vary, depending on the TPs present in that network. Select

whether to use the network information of the TP stream specified in "Select Transponder".

I.e, download the TP information of the satellite you want to find from a particular TP and then

use this to Auto Search the channels in the TP group. The number of channels searched may

vary depending on the TP information transmitted. Select Network Search and then use the

buttons to set it.

9.7 Manual Search Function

Use this channel search by entering the TP information manually to the receiver. This channel

search is often used to search for a particular channel or those channels that "Auto Search"

has missed, but it requires comparatively more expertise.

Select "Manual Search" and then press the OK button.

Select the satellite you want to track.

Set the LNB information and DiSEqC information for the

satellite. You can use the existing setting. To change the

setting, use the buttons.

Set the LNB polarization of the TP to "Horizontal" or

"Vertical".

After the settings are completed, select "Next" and then

press the OK button.

Set the Down Frequency of the TP.

Set the Symbol Rate of the TP.

Select the type of channels to search: FTA, Scrambled, ALL or Network.

Press the OK button to start searching using the above settings.

Another search method is "Advanced Search". Use this channel search to search for a

particular channel or channels ones that you couldn't find using "Manual Search". Enter the

PID of the channel you want to search.

Set the channel's Video PID.

Set the channel's Audio PID.

Set the channel's PCR PID.

Press the OK button at "Start Search"

The names of the channels will be listed.

Press the EXIT button to return to viewing mode and check that the reception of the

selected channel is good.

9.8 Transponder Editor

The "Transponder Editor" allows you to change, add, and

delete satellite information.

Go to the "Main Menu", select "Installation", select

"Transponder Editor", and then press the OK button.

Add a Satellite

Use the buttons to move to the last field on the list.

Press the OK button. The screen will change to allow you

to enter the name of the satellite you are adding.

Use the buttons to enter letters. Use the buttons

to change the cursor position.

When you have finished entering the satellite name,

press OK.

Press the OK button to enter the added satellite's TP

information of the added satellite.

When the TP information input field appears in the right

panel, press the OK button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax DVB 168S Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info