Bedienungsanleitung Triax DVB T1 PVR (Seite 45 von 50) (Deutsch, Englisch)

485388

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

DVB T1 PVR

- 19 -

9.7 Edit Channel Name

If you would like to change or amend the names of TV or radio stations in the program lists ("Total

List" or "Favorites List") you can do so in "3. Edit Channel Names" in the menu, "Favorite List

Manager". Select the corresponding program list with the buttons and launch it by pressing

OK. Select the name to be edited with the buttons and press OK.

9.3 Active Aerial Antenna - Power Supply

So-called active aerial antennas (indoor or outdoor) are widely used for the reception of digital

terrestrial TV. At the initial operation of the receiver you can switch on the power supply required

for these aerial antennas. The built-in amplifier of the aerial antenna is then automatically powered

by the DVB-T receiver via the connection cable and does not require additional wiring.

You can switch the power supply on or off at any given time from within the menu "General

Settings" (menu item 8). If you have a standard aerial antenna without the need to receive power,

the setting for "Antenna Booster Power" must be set to "OFF".

Go to "Favorite List Manager" and select "Remove Channels of Total List".

Select unwanted channel(s) with the buttons and OK.

Shift selected channel(s) into the trash can "Recycled", using the button.

Press GREEN button to move to the trash can "Recycled".

Press OK to shift back channels from trash can to the "Total List", if needed.

Press EXIT to delete all channels from the trash can. A warning message appears.

Press OK for delete, press EXIT to cancel the delete process.

9.6 Delete Channels of Total List

When performing an "Automatic Search" also some unwanted channels may be caught. To delete

individual channels from the "Total List" :

9.4 Auto Search Function

When you set up your receiver for the first time, an "Auto

Search" process will start automatically. If it should fail for

some reasons or you wish to search for new TV channels,

please follow the steps listed below.

Select "Auto Search" in the "Channel Manager" menu and

then press the OK button.

TV (and radio broadcast channels, if available) will be

searched.

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.

Select "Manual Search" in the "Channel Manager" menu and

then press the OK button.

Select the multiplexes (TV channel packages) you want to

search, using the buttons and OK.

After the settings are completed, press the RED button to start "Manual Search".

The names of the found channels will be listed.

After the search process has been finished, the unit automatically turns to normal TV viewing

mode.

9.5 Manual Search Function

Use this channel search by entering the multiplex information

manually to the receiver. This channel search is often used to

search for a particular channel or those channels that "Auto

Search" has missed, but it requires comparatively more

expertise.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triax DVB T1 PVR Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info