757656
19
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
Troubleshooting
If your Trionic Veloped does not work satisfactory, you can
check it by following the troubleshooting guide below. If the
guide does not help you solve the problem, please contact your
retailer, service provider, distributor or Trionic Sverige AB.
Environmentally Friendly
e Trionic Veloped is manufactured in the way to have as little
negative impact on the environment as possible during its lifecy-
cle. When the product has served its purpose it can be scrapped
and the parts can be recycled.
e product’s aluminium components are separated from
the remaining parts when sorted for recycling. e parts are
sorted into metal, plastic and mixed materials.
e greater part of the product is made of aluminium, steel
and plastic.
Examples of components made of mixed materials are the
brake levers, wheels and gripbar.
If you are uncertain of how to handle the recyclable mate-
rial, please contact your local authorities, as dierent muni-
cipalities/recycling companies follow dierent recycling
methods.
Trionic Sverige AB is a member of REPA, PRO Europe (Die
Grüne punkt) and fully implements the European Directive on
Packaging and Packaging Waste dated December 20, 1994.
Problem: The seat is sagging/too low.
Possible cause: The rear velcro band under
the seat base needs to be tightened, or the
Veloped is not correctly unfolded.
Action: Remove the seat cover and tighten
the rear velcro band of the seat base, with
the Veloped fully unfolded. Do not tighten
the Velcro band too much since it may turn
the sliding of the seat back and forth more
difcult.
Problem: Difcult steering.
Possible cause: The front wheel is adjusted
for irregular terrain/upper position.
Action: Change the setting of the front
wheel suspension to the easy turning mode/
lower position, as described in the chapter
«Change the Front Wheel Setting».
Problem: Poor brake function.
Possible cause: The brake hub or brake band
is worn out, or the cable is not tight enough.
Action: Adjust the brake cable tension as
described in the chapter «Brake
Adjustment».
Problem: The rear or front wheels are not
secured.
Possible cause: The wheel has not been cor-
rectly attached.
Action: Check that the push button of the
axle locks correctly. Please contact your
service provider if the wheel does not lock
correctly in position.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

trionic-veloped

Suche zurücksetzen

  • Basissitz mit vorderem Rahmen verbinden ? Trionin Veloped Eingereicht am 25-9-2022 15:36

    Antworten Frage melden
  • Wie befestige ich den Basissitz am vorderen Rahmen beim Trionic Veloped Eingereicht am 25-9-2022 15:28

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Trionic Veloped wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Trionic Veloped

Trionic Veloped Bedienungsanleitung - Deutsch - 20 seiten

Trionic Veloped Bedienungsanleitung - Holländisch - 20 seiten

Trionic Veloped Bedienungsanleitung - Französisch - 20 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info