Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of
the power unit.
Before using for the first time
Remove all packaging including the plastic blade covers from the knife blade. These
covers should be discarded as they are to protect the blade during manufacture and
transport only.
To use the food chopper
o Place the non slip mat onto the work-surface, rib upside down.
o Position the bowl onto the middle of the non slip mat.
o Fit the knife blade over the pin in the bowl.
o Add your food, see processing guide.
Cut large pieced of food into 1-2 cm (1/2-3/4 in pieces).
s coffee beans, ice cubes, spices or
chocolate-
o Fit the splashguard. Make sure the slots in the splashguard fit over the
handles in the rim of the bowl.
The super chopper will not operate unless the splashguard in fitted in the right
position.
o Fit the power unit.
o The power unit will only fit correctly in two positions.
o Plug in. press down on the power unit for short lengths of time to produce a
pulsing action-this will avoid over processing the ingredients.
o If the appliance is overloaded, remove some of the mixture and continue
processing in several batches.
o Stop the appliance and scrape down if necessary.
o Do not run the chopper continuously for longer than 10 seconds. Leave to
cool for 1 minute in between each 10 seconds operation.
o After use. Unplug and dismantle.
Cleaning
Always switch off and unplug before cleaning.
Handle the cutting blade with care as they are extremely sharp.
Some food will discolorflavor of your food.
