Bedienungsanleitung Tristar bm 4584 (Seite 17 von 78) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

379982

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Warning display

1. If the display shows “H HH” after the program has been started, the temperature inside is still too

high. Then the program has to be stopped. Open the lid and let the machine cool down for 10 to 20

minutes.

2. If the display shows “E E0” or “E E1”after you have touched START/STOP, the temperature sensor

is malfunction please check the sensor carefully by Authorized expert.

Before the first use

1. Please check whether all parts and accessories are complete and free of damage.

2. Clean all the parts according to the section“Cleaning and Maintenance”.

3. Set the bread maker on BAKE mode and bake empty for about 10 minutes. Then let it cool down

and clean all the detached parts again.

4. Dry all parts thoroughly and assemble them, the appliance is ready for using.

How to make bread

1. Place the bread pan in position, then turning it in clockwise until they click in correct position. Fix

the kneading blade onto the drive shaft. It is recommended to fill hole with heat-resisting margarine

prior to place the kneading blade to avoid the dough sticking the kneading blade, also this would

make the kneading blade be removed from bread easily.

2. Place ingredients into the bread pan. Please keep to the order mentioned in the recipe. Usually the

water or liquid substance should be put firstly, then add sugar, salt and flour, always add yeast or

baking powder as the last ingredient.

水或液体

干的配料

酵母或苏打

Yeast or soda

Dry ingredients

Water or liquid

Note: the maximum quantities of the flour and yeast which may be used refer to the recipe.

3. Make a small indentation on the top of flour with finger, add yeast into the indentation, make sure

it does not come into contact with the liquid or salt.

4. Close the lid gently and plug the power cord into a wall outlet.

5. Touch the Menu button until your desired program is selected.

6. Touch the COLOR button to select the desired crust color.

7. Touch the LOAF button to select the desired size. (1.5LB or 2.0LB)

8. Set the delay time by touching Time button. This step may be skipped if you want the bread maker

to start working immediately.

9. Touch the START/STOP button for approx. 2 seconds to start working.

10. For the program of BASIC, WHOLE WHEAT, FRENCH, QUICK, SWEET, CAKE, ULTRA-FAST and

HOME-MADE beeps sound will be heard during operation. This is to prompt you to add ingredients.

Open the Lid and put in some ingredients. It is possible that steam will escape through the vent in the

lid during baking. This is normal.

11. Once the process has been completed, one beep will be heard. You can touch START/STOP

button for approx. 2 seconds to stop the process and take out the bread. Open the Lid and while

using oven mitts, turn the bread pan in anti-clockwise and take out the bread pan.

Caution: the Bread pan and bread may be very hot! Always handle with care.

12. Let the bread pan cool down before removing the bread. Then use non-stick spatula to gently

loosen the sides of the bread from the pan.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tristar bm 4584 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info