Bedienungsanleitung Tristar KZ-1223 (Seite 4 von 16) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch, Schwedisch)

471939

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Operation and maintenance

Remove all packaging of the device.

Check if the voltage of the appliance corresponds to the main voltage of your home.

Rated voltage : AC220-240V 50Hz.

Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around

the device. This device is not suitable for installation in a cabinet or for outside use.

Before first use

Take the removable filter out of the funnel (No. 2) rinse the filter and the coffeepot (No. 4) with

hot water. Half-fill the water tank (No. 3) with water and place the filter and the coffeepot back

on the device. Turn the on/off switch (No. 6) to ON. The device is rinsed with hot water.

Turn the machine off and empty the coffeepot. Attention! The water is hot.

Your coffee machine is ready for use.

Use

Fill the reservoir with the desired quantity of clean drinking water. Place a paper coffee filter in

the removable filter or just use the removable filter only, depending on your needs.

Fill the filter with the desired amount of ground coffee.

Place the coffeepot (No. 4) underneath the filter and switch the device to ON.

Make sure the coffeepot is placed correctly on the hotplate.

When you remove the coffeepot from this appliance, a non-drip valve will automatically

operate and prevents drops of coffee dripping onto the hotplate (No. 5). Replacement of the

coffeepot automatically opens the non-drip valve and allows any remaining coffee to filter

through into the coffeepot. Wait until the brewing process is finished and the filter is empty.

Switch off the device when it is ready. If you want to keep the coffee hot, place the coffeepot

back at the hotplate and switch the device to ON. Your coffee will remain hot for several hours.

Cleaning the device

Remove the detachable filter out and empty it into the bin. Rinse the removable filter and the

coffeepot after use with hot water. Remove the other filter regularly and rinse it with warm

water. These parts are not suitable for the dishwasher.

Decalcifying the coffee machine

prolongs it’s life span. For decalcification only use products especially made for decalcification

of coffee machines. Always rinse the device with water after decalcification.

The outside surface of the coffee maker should be cleaned with a damp cloth.

Your coffee will remain hot at the

hotplate (No. 5). Be sure the device

is switched to ON.

IMPORTANT SAFEGUARDS

• Read all instructions before use.

• Do not touch hot surfaces. Use handles or knobs.

• To protect against electric shock, do not immerse cord, plug or appliance in water or

any other liquid.

• Unplug from outlet when not in use and before cleaning. Allow the device to cool

before putting on or taking off parts. Do not operate any appliance with a damaged

cord or plug or after the appliance malfunctions, or has been damaged in any

manner.

• The use of accessory attachments not recommended by the appliance manufacturer

may cause injuries and invalidate any warranty you may have.

• Do not use outdoors, or on or near direct heat sources

• Do not let cord hang over edge of table or counter, or touch hot surfaces or come

into contact with the hot parts or allow the product to be situated underneath or close

to curtains, window coverings etc.

• This appliance is for household use only and only for the purpose it is made for.

• The appliance must be placed on a stable, level surface.

• This appliance is an attended appliance, and as such should never be left ON or

whilst hot without adult supervision.

• This appliance is not intended for use by persons (including children) with reduced

physical sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

• This device is not intended for use with an external timer or a remote control system.

• Note: To avoid danger by the accidental resetting thermal protection, the device may

not be powered through an external switching device, such as a timer, or connected

to a circuit and is turned regularly by the subject.

• This device is not intended for use with an external timer or a remote control system.

• Note: To avoid danger by the accidental resetting thermal protection, the device may

not be powered through an external switching device, such as a timer, or connected

to a circuit and is turned regularly by the subject.

• A damaged cord or plug must be replaced by an authorized technician to avoid a

hazard. Do not repair the device yourself.

• Using an extension cord or something similar is not allowed.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tristar KZ-1223 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info