Bedienungsanleitung Tristar ST-8915 (Seite 6 von 60) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

483964

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

BEFORE THE FIRST USE

• Before the rst use, please remove any sticker or protective cover.

• Place your steam generator on a stable, horizontal heat-resistant

surface.

• For the rst use, use the iron on an old piece of fabric to ensure the

soleplate and water tank are completely clean.

• Never use the steam generator when water tank is empty, rell it

before use it again.

NOTE: It is normal that strange odor comes out from the unit for the rst

use. This will cause after a short while.

NOTE: Some particles may come out of the soleplate when you use the

iron for the rst time. This is normal; the particles are harmless and stop

coming out of the iron after a short while.

NOTE: When you switch on the appliance, the steam generator may

produce a pumping sound. This is normal; the sound tells you that water is

pumped into the steam generator.

NOTE: During the heating process of the soleplate, there will be little

steam coming out from the soleplate automatically, this phenomenon will

continue for about 3 seconds, This is normal.

USE

Dry ironing

1. Put the iron on the steam generator’s base.

2. Connect the plug to wall outlet and press the power button.

3. Turn temperature dial to your desired setting, which is depended on

the fabric of garment. The temperature indicator will illuminate, the

iron starts heating.

4. When the temperature indicator turns o, the selected temperature is

reached, you can start ironing.

Caution: Never touch hot soleplate at any time!

Steam ironing

1. Unlock the water tank with the trigger and pull out the water tank,

open the lling cap and ll it with water. Use of puried water with less

calcium particles will extend the life time of the appliance. The max

capacity of water tank is 1.7L, never exceed the maximum water level.

2. Replace the detachable water tank properly.

3. Put the iron on the steam generator’s base.

4. Connect the plug to the wall outlet, press the power button, the

defaulted low steam rate indicator will ash. Turn temperature dial to

your desired setting, which is depended on the fabric of garment, the

temperature indicator will illuminate.

5. The water in the tank will be heated, after a few minutes, the

temperature indicator will be extinguished, it indicates the soleplate

reached the selected temperature. After a few minutes the selected

steam rate indicator will illuminate constantly, now the appliance can

produce steam.

6. According to your requirement, you can select the desired steam

output, there are three modes: low, medium and high. Make sure that

there is enough water in the tank.

Caution: Never direct the steam at people!

7. After ironing, press the power button for a while and the appliance will

be turned o, all the indicators will be extinguished. Remove the plug

from the wall socket. The soleplate is still hot make sure you’ll never

touch it, place the iron on the thermal insulating cushion to let it cool

down completely.

Instruction manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tristar ST-8915 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info