Bedienungsanleitung Triton SJA200 (Seite 8 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

665092

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

Bicycles

• SuperJaws is ideal for clamping bicycles during repair and maintenance, and will hold

the bicycle securely at the required height. However, modern bicycle frames need careful

consideration before clamping. Carbon ﬁbre frames are very easy to damage and should

not be clamped. Steel bicycle frames are possible to clamp, so long as the clamping is

applied carefully and slowly. Ideally, for any frame, the best solution is to ﬁt an old seat

post to the frame and clamp the seat post instead, to prevent the frame being damaged

Note: Clamp so the weight of the bicycle is dispersed evenly across SuperJaws.

Bicycles are considerably heavier at the back than at the front.

Additional Uses

There are many additional uses for SuperJaws which are not featured in

this manual. Whatever the use, it is important to heed the following:

• Always check SuperJaws is correctly assembled before use

• Do not overload SuperJaws beyond its load capacity (see ‘Speciﬁcation’)

• Make sure the workpiece is correctly balanced

• Do not exert too much force on the workpiece while clamping

• Do not use clamping force beyond 1,000kg; only clamp to the required force

• Do not use this product as a step or for building work platforms for people

Accessories

Engineers Jaws SJA470

• The bolt-on jaws are manufactured from extremely strong ductile cast

iron, and are specially shaped to increase grip when clamping pipe or

round sections up to 50mm in diameter. They also have an integral anvil

for hammering or bending of heavy metal sections (Image AJ)

Log Jaws SJA460

• Suitable for gripping logs or poles, these jaws also bolt onto the standard steel jaws

and are formed from steel plate, and zinc-plated for corrosion resistance (Image AK)

Note: Logs or poles up to 175mm in diameter are gripped

ﬁrmly for chain sawing, drilling, rebating etc.

Extension Tray SJA420

The Extension Tray ﬁts through the Extension Tray Mounting Holes (12) in either side of

the main Body (4). It provides outboard support for the workpiece, keeping it level while

clamping into position. A tough, high density polyethylene tray locates onto the support

tubes as a convenient place to hold tools, parts and other accessories (Image AL)

Note: For additional support and capacity a second extension tray

can be ﬁtted onto the opposite side of SuperJaws

Note: Check with your Triton stockist for additional accessories for your SuperJaws.

Spare parts for your SuperJaws can be obtained from toolsparesonline.com.

Maintenance

• Basic maintenance of this product should ensure a long working life

• Any damage to SuperJaws should be repaired and carefully

inspected before use by qualiﬁed repair personnel

• Servicing should be carried out using only original Triton replacement parts

• Triton Tools will not be responsible for any damage or injury caused

by unauthorised repair or mishandling of the machine

Please note:

• Depending on the type of use, it is quite likely this product will receive scratches

and marks that will remove paint and result in corrosion over time. Check

for corrosion and treat if necessary. Some disassembly may be required

to check thoroughly, such as the underside of the moving jaw. Always dry

SuperJaws if it gets wet, particularly on any exposed metal surfaces

• Lubricant or grease may be required from time to time, but always

apply it in moderation and never apply lubricant if it will affect the way

the product operates. Any mechanism should only be lubricated with

a light spray lubricant which cannot affect the way it operates

• If SuperJaws becomes damaged or corroded, and requires major repair,

such as welding, you can no longer rely on the given ﬁgures for clamping

force or load capacity. Under these circumstances, SuperJaws should be

replaced immediately, as this level of repair will void the guarantee

Removing the urethane jaw faces

• The jaw facings can be removed to achieve a greater clamping range, or for

replacement if worn or damaged, or when ﬁtting the optional jaws

Note: Replacement urethane jaw pads are available from your

Triton stockist or from www.toolsparesonline.com.

1. The Fixed Jaw Urethane Face (1) is removed by carefully prying it off the

Fixed Jaw (14) using a broad screwdriver or similar (Image AM)

2. To remove the Moving Jaw Urethane Faces (2), push the backing face

to the right (when viewed from the front of SuperJaws), in order to

disengage the connection pins. The backing face can then be removed,

allowing the front to be pulled off the Moving Jaw (15) (Image AN)

• The pawl carrier pivot pin may occasionally require a small amount of

spray lubricant, as shown, if it doesn’t pivot smoothly (Image AP)

Storage

• Store this tool carefully in a secure, dry place out of the reach of children

Disposal

Always adhere to national regulations when disposing of power tools

that are no longer functional and are not viable for repair.

• Do not dispose of power tools with household waste

• Contact your local waste disposal authority for information

on the correct way to dispose of tools

330105_Z1MANPRO1.indd 8 09/12/2016 11:53

Triton SJA200 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info