5
GB
General Safety
WARNING Read all safety warnings and all instructions.Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury
WARNING: This appliance is not intended for use by persons (including children) with
reduced, physical or mental capabilities or lack of experience or knowledge unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safetyChildren must be supervised to ensure that they do not play
with the appliance.
Save all warnings and instructions for future reference.
The term “power tool”
battery-operated (cordless) power tool.
1)
a) Cluttered or dark areas invite accidents.
b)
flammable liquids,P
fumes.
c) Distractions can
cause you to lose control.
2)
a)
use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b)
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) W
increase the risk of electric shock.
d)
power tool. Keep cord away from heat,
entangled cords increase the risk of electric shock.
e)
use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f)
device (RCD) protected supplyUse of an RCD reduces the risk of electric shock.
3) Personal safety
a)
tool. Do not use a power tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
b) Protective equipment
such as dust mask, non-skid safety shoes,
appropriate conditions will reduce personal injuries.
c)
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energising power tools tha
switch on invites accidents.
d) A wrench or a
key left attached to a rotating part of the power tool may result in personal injury.
e) This enables better
control of the power tool in unexpected situations.
f) Keep your hair,
gloves away from moving parts. Loose clothes,
moving parts.
g)
ensure these are connected and properly used. Use of dust collection can reduce dust-
related hazards.
4)
a) The
correct power tool will do the job better and safer at the rate for which it was designed.
b) An
cannot be controlled with the switch is dangerous and must be repaired.
c)
tool before making any adjustments, changing accessories,
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d)
unfamiliar with the power tool or these instructions to operate the power tool.Power
tools are dangerous in the hands of untrained users.
e)
of parts and any other condition that may affect the power tool’s operation.
damaged, have the power tool repaired before use.Many accidents are caused by
poorly maintained power tools.
f) Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g)
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
5) Service
a)
replacement parts. This will ensure that the safety of the power tool is maintained.
Sanding T
WARNING!
• Hold the power tool by insulated handles or gripping surfaces only
sanding belt/sheet may contact its own cord. Cutting a
metal parts of the power tool ‘live’ and could give the operator an electric shock.
• Use clamps or another practical way to secure the workpiece to a stable platform.
Holding the workpiece by hand or against the body makes it unstable and may lead to loss
of control.
• Recommendation that the tool always be supplied via a residual current device with
a rated residual current of 30 mA or less.
• If the replacement of the supply cord is necessary,
manufacturer or his agent in order to avoid a safety hazard.
a. AL
minimum FFP2 rating, eye protection and ear defenders
b. Ensure all people in the vicinity of the work area are also equipped with suitable
personal protective equipment
c. T
teak), as the dust produced is toxic and can cause extreme reactions
d. NEVER use to process any materials containing asbestos. Consult a qualified
professional, if you are uncertain whether an object contains asbestos
e. DO NOT sand magnesium or alloys containing a high percentage of magnesium
f. Be aware of paint finishes or treatments that may have been applied to the material
that is being sanded. Many treatments can create dust that is toxic,
harmful. If working on a building constructed prior to 1960,
of encountering lead-based paints
g. The dust produced when sanding lead-based paints is particularly hazardous to
children, pregnant women, DO NOT allow these
people near to the work area, even if wearing appropriate personal protective equipment
h. Whenever possible,
i. Be especially careful when using a machine for both wood and metal sanding.
Sparks from metal can easily ignite wood dust. AL
to reduce the risk of fire
j. Empty the dust bag or container (where applicable) frequently during use, before
taking breaks and after completion of sanding. Dust may be an explosion hazard.
NOT throw sanding dust into an open fire. Spontaneous combustion may occur when oil or
water particles come into contact with dust particles.
and in accordance with local laws and regulations.
k. Work surf
of burning (smoke or ash), from the work surf
cool. DO NOT touch work surface or sandpaper until they have had time to cool
l. DO NOT touch the moving sandpaper
m. AL
n. DO NOT use for wet sanding. Liquids entering the motor housing can cause severe
electric shocks
o. AL
replacing sandpaper
p. Even when this tool is used as prescribed it is not possible to eliminate all residual
risk factors.If you are in any doubt as to safe use of this tool, do not use it
Product Familiarisation
1. Sanding Disc
2. Hook and Loop Backing Pad
3. Mode Selector Switch
4. Auxiliary Handle Adjustment Lever
5. Auxiliary Handle
6. Front Grip
7. On/Off Sliding Switch
8. Main Handle
9. Carbon Brush Access Covers
10. Dust Extraction Port
11. Power Indicator
12. Speed Control Dial
13. Dust Extraction Port Screw
Accessories (not shown):
• 6 x Hook and loop sanding discs (2 x 60 grit, 2 x 120 grit,
• 1 x Pair spare carbon brushes
• 1 x Hook and Loop Backing Pad (125mm)
460509_Z1MANPRO1_NEW.indd 5 21/12/2016 09:59
