Bedienungsanleitung Triton T12RS (Seite 9 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

665057

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

Plunge Cutting

Note: Plunge cutting is not suitable for metals and ceramics or materials with

similar densities or very smooth surfaces.

A plunge cut can be used to make an inset cut when it is not possible to cut

from the edge of a workpiece. This requires careful control to tilt the saw very

slowly.

1. Fit the correct blade for the material with the orientation of the teeth

downwards so there is the maximum Shoe (1) length next to the teeth of

the blade

2. Use the Shoe as the hinge/tilt point as shown in Fig F

3. Keep the blade off the workpiece long enough to allow for the 12.2mm

stroke of the reciprocating action then press the Trigger (6) to operate

4. Carefully and slowly tilt the saw to allow the blade to start cutting into

the surface, keeping a ﬁrm grip of the saw as shown in Fig G until full

breakthrough is achieved

Notes:

• Use the same plunge technique when re-entering the same inset cut slot

until a section of material has been removed that allows entry from the

edge of the material within the inset cut

• If the technique is unsuccessful, due to the blade or hardness of the

material, a more conventional method will be required for an inset cut

as used for metal. Drill a hole or multiple connected holes wider than the

blade and start the cut from the drilled hole

Cutting metal

WARNING: Cutting metal can generate high temperatures for the blade, saw

and the material

The reciprocating saw can cut metals such as sheet steel, pipe, steel rods,

aluminium, brass and copper

• Clamp the workpiece ﬁrmly where possible and cut close to the clamping

point to minimise vibration

• Use a metal-cutting blade, preferably uni-directional unless the workpiece

is securely clamped

• Be careful not to bend or twist the blade and do not force the cutting action

• Use cutting oil to lubricate the cut when sawing soft metals and steel. This

cools the blade and prolongs blade life

• Clamp the workpiece in a vice if possible and cut close to the vice when

cutting conduit pipe or angle iron

• To cut very thin sheet metal, sandwich the sheet between hardboard or

plywood and clamp the layers to prevent vibration and tearing of the metal

Accessories

• A range of T12 accessories, including T12B 1.5Ah battery, T12HCB 3Ah

battery and T12BC battery charger are available from your Triton dealer. All

Triton T12 power tools use the same batteries and battery chargers

• Spare parts can be purchased from your Triton dealer or online at www.

toolsparesonline.com

Maintenance

• This tool is manufactured using class-leading components and uses

intelligent circuitry that protects the tool and its components. In normal use

it should provide a long working life

Cleaning

• Keep your machine clean at all times. Dirt and dust will cause internal parts

to wear quickly, and shorten the machine’s service life. Clean the body of

your machine with a soft brush or dry cloth. If available, use clean, dry,

compressed air to blow through the ventilation holes

Storage

• Store this tool and its accessories after use in its case, in a dry, secure

place out of the reach of children

Disposal

Always adhere to national regulations when disposing of power tools that are

no longer functional and are not viable for repair.

• Do not dispose of power tools, or other waste electrical and electronic

equipment (WEEE), with household waste

• Contact your local waste disposal authority for information on the correct

way to dispose of power tools

• Li-Ion batteries should not be disposed of with household waste. If you do

not know of a li-ion battery recycling centre in your area, contact your local

authority or original dealer for advice on disposal of li-ion batteries

103935_Z1MANPRO1.indd 9 26/09/2014 11:17

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton T12RS Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info