Bedienungsanleitung Triton TCMBS (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch)

665068

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Product Familiarisation

1. On/Off Switch

2. Main Handle

3. Micro Adjustment Knob

4. Front Belt Roller

5. Drive Roller

6. Belt Tension Release Lever

7. Belt Direction Indicator

Accessories (not shown):

• 1x dust bag adaptor

• 3 x sanding belts

Intended Use

Compact belt sander for intricate, light to medium duty sanding on soft and hard woods and

similar materials.

Unpacking Your Tool

• Carefully unpack and inspect your tool. Fully familiarise yourself with all its features and

functions

• Ensure that all parts of the tool are present and in good condition. If any parts are missing or

damaged, have such parts replaced before attempting to use this tool

Before Use

Changing the sanding belt

WARNING: Always ensure that the tool is switched off and the plug is removed from the power

point before ﬁtting or removing sanding belts.

Note: A range of sanding belts from Triton, in a choice of grits, are available for use with this

Palm Belt Sander.

1. Ensure the sander is disconnected from the power supply

2. Lift the Belt Tension Release Lever (6) to release tension on the belt

3. Choose a new belt according to intended task, eg; low grit rating produces faster stock

removal, high grit rating for smoother ﬁnish

4. Check that the replacement belt has a good join and is not frayed at the edges

5. Position the new belt over the rollers, with the rotation arrows on the inside of the belt pointing

in the same direction as the Belt Direction Indicator (7) on the sander.

6. Push the Belt Tension Release Lever (6) down to tension the belt

7. Hold the sander upside down and plug into the mains

8. With the belt running, use the Micro Adjustment Knob (3) to align the belt to the centre of the

plate

Dust extraction

• It is recommended that the sander is connected to a vacuum cleaner or dust extractor, using

the dust extraction port. This will signiﬁcantly reduce the dust in the air around the work area

• If vacuum dust extraction is not available in your work area, a dust bag can be ﬁtted to the

dust extraction port using the included dust bag adaptor (Image A)

• A suitable breathing mask should be worn when operating this machine. All wood and paint

dust is hazardous to health and may also be toxic.

Operation

Switching on and off

• Always hold the sander securely by the Main Handle (2)

• Ensure the sander is not in contact with the surface when the machine is switched on

• To switch the sander on, press the ‘I’ switch. To switch the sander off, press the ‘0’ switch

Sanding

WARNING: Do not apply too much pressure on the palm belt sander. Pushing down too hard may

cause damage or reduce the life of the product.

WARNING: Keep hands away from the belt, as it will continue to move for a short time after the

machine is switched off.

• Apply light pressure when the sander is brought into contact with the workpiece

• Allow the sander to reach full speed before moving it across the workpiece

• To remove paint or smooth very rough wood, sand across the grain at 45° in two directions

and then ﬁnish parallel with the grain (Image B)

• Use the Front Belt Roller (4) only to sand corners or irregular shapes (Image C)

• Lift the sander clear of the workpiece before switching off

Accessories

• A range of accessories, including a variety of different grade sanding sheets, is available from

your Triton dealer. Spare parts can be purchased from your Triton dealer or online at www.

toolsparesonline.com

Maintenance

• This tool is manufactured using class-leading components and makes use of the latest in

intelligent circuitry that protects the tool and its components. In normal use it should provide

a long working life

Cleaning

• Keep your machine clean at all times. Dirt and dust will cause internal parts to wear quickly,

and shorten the machine’s service life. Clean the body of your machine with a soft brush or

dry cloth. If available, use clean, dry, compressed air to blow through the ventilation holes

Storage

• Store this tool and its accessories after use in its case, in a dry, secure place out of the reach

of children

Disposal

Always adhere to national regulations when disposing of power tools that are no longer functional

and are not viable for repair.

• Do not dispose of power tools, or other waste electrical and electronic equipment (WEEE),

with household waste

• Contact your local waste disposal authority for information on the correct way to dispose of

power tools

475114_Z1MANPRO1.indd 6 25/08/2015 18:14

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triton TCMBS Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info