5
GB
WARNING:
and limit the time of exposure if necessary.
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING:
numbness, tingling and reduced ability to grip.
chronic condition. If necessary
anti-vibration gloves. Do not operate the tool with hands below a normal comfortable
temperature, as vibration will have a greater effect. Use the figures provided in the
specification relating to vibration to calculate the dura
the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards.
normal working conditions.
tool, may produce increased levels of noise and vibration. www
provides information on sound and vibration levels in the workplace that may be
useful to domestic users who use tools for long periods of time.
General Safety
WARNING Read all safety warnings and all instructions.Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury
WARNING: This appliance is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of e
knowledge unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safetyChildren must be
supervised to ensure that they do not play with the appliance.
Save all warnings and instructions for future reference.
The term “power tool”
tool or battery-operated (cordless) po
1) Work area safety
a) Keep work area clean and well lit.Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids,P
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
way
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators.There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. W
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat,
Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
f) If operating a power tool in a damp location is unavoidable,
current device (RCD) protected supplyUse of an RCD reduces the risk of
electric shock.
g) When used in Australia or New Zealand, it is recommended that this tool is
AL
of 30mA or less.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.A moment of ina
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, non-skid safety shoes,
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energising power
tools that have the switch on invites accidents.
d) Remove anA
wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper footing and balance at all times.This enables
better control of the power tool in unexpected situations.
f) Dress properly
clothing and gloves away from moving parts. Loose c
hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection
facilities,Use of dust
collection can reduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories,
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. P
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged,Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Service
a) Have your power tool ser
identical replacement parts. This will ensure that the safety of the power tool is
maintained.
Dowel and Biscuit Jointer Safety
WARNING!
• Jointers must be rated for at least the speed marked on the tool. Jointers
running over rated speed can fly apart and cause injury.
• Always use the guard. The guard protects the operator from broken fragments
and unintentional contact with the drill.
• Hold power tool by insulated gripping surfaces,
contact its own cord. Cutting a
power tool “live”
• Do not allow anyone under the age of 18 years to use this tool. Ensure that
operators are familiar with these operating and safety instructions.
• If the replacement of the supply cord is necessary,
the manufacturer or his agent in order to avoid a safety hazard.
• It is strongly recommended that the tool always be supplied via a residual
current device with a rated residual current of 30 mA or less.
WARNING: Do not use blunt or damaged drills.
WARNING: Check the proper function of the guard retracting system before use.
186171_Z1MANPRO1.indd 5 29/11/2016 11:23
