Bedienungsanleitung Triumph-Adler CLP 4416 (Seite 70 von 86) (Englisch)

647522

Zoom out

Zoom in

Vorherige Seite

1/86

Nächste Seite

Troubleshooting

5-10 BASIC OPERATION GUIDE

MemoryCard err##

Press GO

A memory card error has occurred. Look at the error code given in place of ## and

refer to

Storage Error Codes on page 5-12. To ignore the memory card error, press

[GO].

Missing

duplex drawer

The duplex drawer is either not installed or incorrectly inserted. Insert the duplex

drawer securely.

No multi copies

Press GO

Multi copies cannot be printed because RAM disk is disabled or the hard disk is not

installed. Press [GO] to print error report.

Paper jam

###############

A paper jam has occurred. The location of the paper jam is indicated in place of the

#’s. For details, see

Clearing Paper Jams on page 5-14.

Paper path error

There is no paper cassette in the feeder, or the cassette is not inserted properly.

After reinserting the paper cassette, you should be able to print. When two or more

optional feeders are installed and the lowest one is selected, the same message

will appear if any of the upper paper feeder and the printer cassette is improperly

installed.

Print overrun

††

Press GO

The print job transferred to the printer was too complex to print on a page. Press

[GO] to resume printing. (A page break may be automatically inserted in some

places.).

You can abandon printing by pressing [CANCEL].

If Auto Error Clear is set to On, printing will be automatically resumed after a preset

period of time. For details on Auto Error Clear, refer to Using the Operator Panel,

section of the Advanced Operation Guide.

RAM disk error##

Press GO

A RAM disk error has occurred. Look at the error code given in place of ## and

refer to

Storage Error Codes on page 5-12. To ignore the RAM disk error, press

[GO].

Replace toner

C,M,Y,K

Replace toner

Clean printer

Two message items are displayed alternately. Toner has run out in the toner

container(s). Replace the toner container using a new toner kit for the particular

color. The printer does not operate when this message is displayed.

For example, if Replace toner C,K is displayed, replace the cyan and the black

toner containers.

Set paper

Press GO

The MP tray is out of paper. Load paper and press [GO]. (Note that feeding the

paper having a paper size which does not match the current paper size from the

MP tray can cause paper jam.)

Toner low

C,M,Y,K

Replace the toner container using a new toner kit. Color of the toner container that

needs to be replaced is represented by C (Cyan), M (Magenta), Y (Yellow), and K

(Black).

Top tray

paper full

The top tray has become full (approx. 250 pages). You must remove all printed

pages from the top tray. When the printer detects that the top tray is empty again,

the printer will continues printing into the top tray.

Message Corrective Action

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triumph-Adler CLP 4416 Seite 70

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Triumph-Adler CLP 4416

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info