Bedienungsanleitung Triumph-Adler P-5030DN (Seite 12 von 312) (Englisch)

651351

Zoom out

Zoom in

Vorherige Seite

1/312

Nächste Seite

viii

Energy Saving Control Function

To reduce energy consumption while in a waiting state, the device comes equipped with an energy saving control function

for switching to a Sleep Mode where power consumption is automatically reduced to a minimum after a certain amount of

time elapses since the device was last used. For details, refer to Energy Saver Function on page 2-21.

Sleep

The device automatically enters Sleep when 1 minute has passed since the device was last used. The amount of time of

no activity that must pass before Sleep is activated may be lengthened. For more information, refer to Sleep Timer (Sleep

timer timeout time) section.

There are two sleep modes: Quick Recovery and Energy Saver. The default setting is Energy Saver mode.

Quick Recovery Mode

The recovery from the sleep mode is faster than when using Energy Saver Mode. The machine automatically recovers and

prints when a job is detected.

Energy Saver Mode

Makes it possible to reduce energy consumption even further than with Quick Recovery Mode.

Power Off Timer

If the printer is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to set the time

until the power turns off. The factory setting for the time until the power turns off is 1 hour.

Duplex Printing

This printer includes duplex printing as a standard function. For example, by printing two single-sided originals onto a single

sheet of paper as a duplex printing, it is possible to lower the amount of paper used.

Printing in duplex mode reduces paper consumption and contributes to the conservation of forest resources. Duplex mode

also reduces the amount of paper that must be purchased, and thereby reduces cost. It is recommended that machines

capable of duplex printing be set to use duplex mode by default.

Resource Saving - Paper

For the preservation and sustainable use of forest resources, it is recommended that recycled as well as virgin paper

certified under environmental stewardship initiatives or carrying recognised ecolabels, which meet EN 12281:2002*1 or an

equivalent quality standard, be used.

This machine also supports printing on 64 g/m² paper. Using such paper containing less raw materials can lead to further

saving of forest resources.

*1: EN12281:2002 "Printing and business paper - Requirements for copy paper for dry toner imaging processes"

Your sales or service representative can provide information about recommended paper types.

Environmental benefits of "Power Management"

To reduce power consumption when idle, this machine is equipped with a power management function that automatically

activates energy-saving mode when the machine is idle for a certain period of time. Although it takes the machine a slight

amount of time to return to READY mode when in energy-saving mode, a significant reduction in energy consumption is

possible.

It is recommended that the machine be used with the activation time for energy-saving mode set to the default setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triumph-Adler P-5030DN Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Triumph-Adler P-5030DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info