Bedienungsanleitung Triumph-Adler P-5531DN (Seite 256 von 352) (Englisch)

651346

256

Zoom out

Zoom in

Vorherige Seite

1/352

Nächste Seite

Document Box

5-22

Procedure for printing using Job Box

Follow the work flow below when using Job Box.

Specifying the Job Box from a computer and sending the print job (page 5-30)

▼

Using the operation panel to specify a file within a Box and printing it

• Quick Copy (page 5-22)

• Proof-and-Hold (page 5-22)

• Private Print (page 5-25)

• Stored Job (page 5-25)

Operation panel display

1 Press [Document Box]. Either the Custom Box list screen or the

Job Box menu screen is displayed.

The options available in Job Box are as follows:

• Quick Copy (Using Quick Copy/Proof-and-Hold)...5-22

• Private/Stored (Printing a Private Print/Stored Job)...5-25

• Job Box Setting (Job Box Configuration)...5-28

Quick Copy is displayed if there are any jobs that were saved to the SSD in Quick Copy mode.

Quick Copy is also displayed if there are any jobs that were saved to SSD or RAM disk in Proof-and-Hold mode.

Private/Stored is only displayed if there are any jobs that were saved to the SSD or RAM disk.

Quick Copy (Using Quick Copy/Proof-and-Hold)

Quick Copy mode enables you to print the requested number of copies of a job, simultaneously storing the job on the SSD.

When additional copies are required, you can reprint the required number of copies from the printer operation panel.

The default number of print jobs that can be stored on the SSD is 32. This value can be increased to up to 300. For details,

refer to Job Box Setting (Job Box Configuration) on page 5-28. When the number of jobs reaches the limit, the oldest job

will be overwritten by the new one.

When you print multiple copies, Proof-and Hold mode first prints one copy so that you can proof it before continuing to print

the remaining copies. Since you can proof the printouts before printing the remaining copies, wastage of paper can be

reduced. The printer prints one copy and, at the same time, saves the print job on the SSD or RAM disk. You can also

change the number of copies when resuming printing from the operation panel.

When the printer is turned off, all stored jobs will be deleted.

Job Box:

Exit

Job Box Setting

Note After pressing [Document Box], it is possible to display

either the Custom Box list screen or the Job Box menu screen

or to set them. Refer to Def. Screen(Box) (Document Box default

screen setting) on page 4-94.

If the Custom Box list screen is displayed, follow the procedure

below to display the Job Box menu screen.

1 Press [Back].

2 Press  or  to select Job Box.

3 Press [OK]. The Job Box menu screen appears.

Note When a print job is stored in a Job Box for proof-and-hold, the power consumption is more than that of the

sleep mode.

Refer to the Printing System Driver User Guide for the driver settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triumph-Adler P-5531DN Seite 256

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Triumph-Adler P-5531DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info