Bedienungsanleitung Triumph-Adler P-6031DN (Seite 327 von 352) (Englisch)

651347

327

Zoom out

Zoom in

Vorherige Seite

1/352

Nächste Seite

A-15

Appendix

Moisture Content

Moisture content is defined as the percent ratio of moisture to the dry mass of the paper. Moisture can affect the paper’s

appearance, feed ability, curl, electrostatic properties, and toner fusing characteristics.

The moisture content of the paper varies with the relative humidity in the room. When the relative humidity is high and the

paper absorbs moisture, the paper edges expand, becoming wavy in appearance. When the relative humidity is low and

the paper loses moisture, the edges shrink and tighten, and print contrast may suffer.

Wavy or tight edges can cause jams and alignment anomalies.

To ensure correct moisture content, it is important to store the paper in a controlled environment. Some tips on moisture

control are:

• Store paper in a cool, dry location.

• Keep the paper in its wrapping as long as possible. Re-wrap paper that is not in use.

• Store paper in its original carton. Place a pallet etc. under the carton to separate it from the floor.

• After removing paper from storage, let it stand in the same room as the machine for 48 hours before use.

• Avoid leaving paper where it is exposed to heat, sunlight, or damp.

Paper Grain

When paper is manufactured, it is cut into sheets with the grain running parallel to the length (long grain) or parallel to the

width (short grain). Short grain paper can cause feeding problems in the machine. All paper used in the machine should be

long grain.

Other Paper Properties

Porosity: Indicates the density of paper fiber.

Stiffness: Limp paper may buckle in the machine, resulting in paper jams.

Curl: Most paper naturally tends to curl one way if left unpacked.

Electrostatic discharge: During the printing process the paper is electrostatically charged to attract the toner. The paper

must be able to release this charge so that printed sheets do not cling together in the Output Tray.

Whiteness: The contrast of the printed page depends on the whiteness of the paper. Whiter paper provides a sharper,

brighter appearance.

Quality control: Uneven sheet size, corners that are not square, ragged edges, welded (uncut) sheets, and crushed edges

and corners can cause the machine to malfunction in various ways. A quality paper supplier should take considerable care

to ensure that these problems do not occur.

Packaging: Paper should be packed in a sturdy carton to protect it from damage during transport. Quality paper obtained

from a reputable supplier is usually correctly packaged.

22 81 42 157

24 90 43 163

100 47 176

28 105 53 199

Note When using coated paper, be aware that the sheets will stick together in a very humid environment.

Note You might see the printer emitting steam in the area around the top tray if you use damp paper, but it is safe

to continue printing.

U. S. Bond Weight (lb) Europe Metric Weight (g/m²) U. S. Bond Weight (lb) Europe Metric Weight (g/m²)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Triumph-Adler P-6031DN Seite 327

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Triumph-Adler P-6031DN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info