Bedienungsanleitung Trixie TX7 (Seite 3 von 16) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch)

782788

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Important Notice:

• Please read the Instructions for Use before you use the

automatic feeder.

• The automatic feeder is only suitable for dry feed.

•

Only use the automatic feeder with food container and

lid.

• Do not use the automatic feeder for puppies and kittens

under 7 months of age.

• Place the automatic feeder on level ground.

• The automatic feeder may only be used indoors.

• If the Low-Battery display lights up or the feeder beeps,

please replace the batteries with new ones or power

the dispenser via USB cable.

Before using the automatic feeder:

Place the screw spiral in the outlet of the automatic

feeder, fasten by turning it and ﬁx it with the ﬁxation

column. Now place the shield cap over the food outlet.

Hook the feeding bowl into the opening intended for it.

Place the food container on the feeder body and fasten

by turning it. Fill the food container with dry feed. Place

the lid on the food container and turn it to securely lock

it in place.

Place the batteries (not included) in the battery com-

partments underneath the feeder body or power the fee-

der via the USB cable. Please remove the batteries when

using the micro USB cable (included) and a separately

available USB mains plug (Euro plug item 12709).

Switch on the main switch (next tot he battery compart-

ments).

Programming:

1. Setting the time:

Keep SET pressed for three seconds to set the clock. First

set the correct hour by pressing the arrow buttons (up

or down) – AM stands for morning, PM for afternoon or

evening. Conﬁrm the hour with the OK button. Now the

minute display starts ﬂashing. Set the minutes with the

arrow buttons and conﬁrm with the OK button.

Please note that the automatic feeder can only be pro-

grammed once the time has been set.

2. Prgramming the feeding times:

Press SET and choose the number of feeds per day with

the arrow buttons. Conﬁrm with OK. Now the time starts

ﬂashing for you to choose the ﬁrst feeding time. Choose

the desired time and then press OK. Next the amount of

feed ﬂashes. Chosse the desired amount with the arrow

buttons and conﬁrm with OK:

1 portion equals min. 25 ml/max. 500 ml

Repeat this procedure for every feeding time. Finally

conﬁrm with OK to save all your settings.

By pressing MANUAL you can leave the programming at

any time. Your settings will be saved.

3. Voice recording:

You can make voice recordings that will be played three

times at each feeding time.

To do that press REC/PLAY until a microphone appears

on the display. Your message will now be recorded for

10 seconds. The microphone on the display ﬂashes three

times to indicate the end of the recording.

Now press VOL until the loudspeaker symbol ﬂashes and

choose the desired volume with the arrow buttons.

If you put the volume on zero, no voice recording is played.

4. Locking the keys:

Keep LOCK pressed for three seconds to activate or deacti-

vate the key lock for your settings.

5. Manual feeding:

Keep MANUAL pressed for three seconds. Now the

manual feeding starts. The number of portions dispensed

is shown (max. 40 portions). To stop the food being

dispensed, press MANUAL again.

6. Stop the feeding:

Keep OK pressed for three seconds until the word POR-

TION disappears from the display. The automatic feeder

is now in stand-by mode and does not dispense any feed.

Your settings will not be lost. To reactivate the feeder,

keep OK pressed for three seconds again until the word

PORTION shows up again on the display.

Cleaning:

Switch the feeder off and remove feeding bowl, lid and

food container from the feeder body for cleaning (the

feeding bowl is dishwasher safe). Feed container and lid

should be completely dry before you ﬁll in new feed.

The body should not be cleaned in water, but only wiped

down.

Acquainting your pet with the feeder:

Some pets need a bit of time to get used to the automatic

feeder.

Therefore we have the following recommenda-

tions for you:

• Place the automatic feeder next to your dog’s or cat’s

usual feeding bowl without switching it on.

• At the start, ﬁll both bowls – the one your pet uses and

the feeding bowl of the automatic feeder.

• Once your pet has become used to the automatic feeder,

you can take away the normal feed bowl.

To awaken your pet’s curiosity, we recommend regularly

placing a few treats in the feeding bowl of the automatic

feeder.

E Instructions for Use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trixie TX7 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info