Bedienungsanleitung Tronic TLG 1000 B3 - IAN 66148 (Seite 4 von 36) (Englisch, Dänisch, Schwedisch, Finnisch)

647772

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

8 GB/IE

Preparing the product for use

Charging rechargeable

batteries

Danger!

This device must be used for charging rechargeable

“Ni-Cd” and “Ni-MH” batteries only. Never charge

other types of rechargeable batteries or non-recharge-

able batteries. These types of batteries are not suit-

able for recharging. Non-observance of this advice

could lead to irreparable damage to the universal

battery charger and the inserted batteries.

There is also the risk of ﬁre and explosion!

Note:

Ensure that the batteries are inserted into the charging

bays the right way around (polarity). Otherwise the

batteries will not be charged.

Insert the batteries into the charging bays.

Press 9 V block batteries into the charging

bays until they audibly engage.

From 1 - 8 batteries can be charged

individually as follows:

4 x type C or D batteries in charging bays 1 to

4, with an additional 2 x type 9 volt block

batteries in charging bays 5 and 6,

6 x type AA or AAA in charging bays 1 to 4,

with additional 2 x type 9 volt block batteries

in charging bays 5 and 6.

The charging process now starts. The universal

battery charger has one LED for each compart-

ment in a charging bay. The LEDs for each

charging bay shows the state of charge for

each individual battery.

The universal battery charger performs a quick

capacity test in the ﬁrst 5 seconds:

LCD display: Type AAA, AA, C, D. The LCD display

shows the present capacity of the battery by means

of ﬁve bars.

approx. 0 - 20 % charge

approx. 20 - 40 % charge

approx. 40 - 60 % charge

approx. 60 - 80 % charge

approx. 80 - 100 % charge

LED indicator: Type 9 V block

- The 9 V LED of the charging bay illuminates

orange:

Capacity between 25 %–80 %.

- The LED of the charging bay illuminates red:

Capacity under 25 %.

- The LED of the charging bay illuminates green:

Capacity over 80 %.

Once the capacity of the battery has been deter-

mined, the charging process begins.

The various indicators have the following

meanings:

The LED ﬂashes alternately red and

green:

The rechargeable batteries are being

discharged (refresh function).

The LED ﬂashes green:

The rechargeable batteries are being

charged using a gentle pulse charging

process at a reduced charging current.

The LED continuously illuminates red:

The batteries are being charged.

The LED continuously illuminates green:

The batteries are fully charged.

The LED ﬂashes red:

The batteries are not correctly inserted

into the charging bay or are defective.

Note:

If type C or D batteries are being charged in the

outer charging bays, then their operating states are

shown by the inner LED in each case.

66148_tro_Akkuladegeraet_Content_LB3.indd 8 16.06.11 13:26

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tronic TLG 1000 B3 - IAN 66148 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tronic TLG 1000 B3 - IAN 66148

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info