Bedienungsanleitung Tronic TSW 150 A1 IAN 93815 (Seite 25 von 33) (Deutsch, Englisch, Holländisch)

737489

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

- 22 -

Introduction

Congratulations on the purchase of your new appli

ance. You have clearly decided in favour of a quality

product. These operating instructions are a part of

this product. They contain important information in

regard to safety, use and disposal. Before using the

product, familiarise yourself with all of these opera

ting and safety instructions. Use the product only as

described and only for the specified areas of appli

cation. Retain these instructions for future reference.

In addition, pass these documents on, together with

the product, to any future owner.

Correct Usage

The device is intended for connection to a 12 V vehi

cle power socket and an output of 220 240 V AC,

for the connection of electrical devices with a Euro

plug and a power consumption of up to 150W.

In addition, battery powered devices with a USB

interface e.g. MP3 Players, can be charged from the

USB port.

The device is not intended for commercial or industrial

purposes.

No guarantee claims will be granted for damage

resulting from improper use!

Attention!

Sensitive electronic devices should not be

operated with the power inverter since the

output voltage is not sufficiently constant for

these devices.

Safety information

• This device is not intended for use by individuals

(including children) with restricted physical,

physiological or intellectual abilities or who are

lacking in experience and/or knowledge unless

they are supervised by a person responsible for

their safety or receive from this person instruction

in how the device is to be used. Children should

be supervised to ensure that they do not play

with the device.

• To avoid danger remove the power inverter from

the 12 V in vehicle receptacle after every use

and before each cleaning.

• Check the device and all parts for visible damage.

The safety concept of the device can only func

tion when it is in faultless condition.

• The power inverter must always be easily accessible

so that, in case of emergency, it can be quickly

disconnected from the power supply system.

Risk of electrical shocks.

• Connect the power inverter only to a 12 V in

vehicle receptacle. Connecting the device to a

24 V supply could damage it.

• When connecting the power inverter make sure

that the polarity of the vehicle plug matches the

polarity of the 12 V in vehicle receptacle. The

socket must have an internal positive pole, that is

to say that the positive pole of a vehicle battery

cannot be connected to the chassis of the vehicle.

• You may not open the device casing or repair

the device yourself. Should you do so, the safety

of the device may be compromised and the

warranty becomes void.

• NEVER submerse the device in water.

Wipe it only with a slightly damp cloth.

This device suitable only for use indoors.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tronic TSW 150 A1 IAN 93815 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tronic TSW 150 A1 IAN 93815

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info