Bedienungsanleitung Tronic TSW 300 A1 IAN 61667 (Seite 4 von 42) (Englisch, Dänisch)

737493

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

- 2 -

POWER INVERTER

Intended Use

The device is intended for connection to a 12 V

vehicle power socket or a car battery and an output

of 220 - 240 V AC, for the connection of electrical

devices with Euro plug and a power consumption

of up to 300 Watts. In addition, battery-powered

devices with a USB interface e.g. MP3 Players, can

be charged from the USB port.

The device is not intended for commercial or

industrial purposes.

No guarantee claims will be granted for damage

resulting from improper use!

Attention!

Sensitive electronic devices should not be ope-

rated with the power inverter since the output

voltage is not sufficiently constant for these

devices.

Safety information

• This device is not intended for use by individuals

(including children) with restricted physical, physio-

logical or intellectual abilities or deficiences in

experience and/or knowledge unless they are

supervised by a person responsible for their safety

or receive from this person instruction in how the

device is to be used. Children should be supervised

to ensure that they do not play with the device.

• To avoid dangers remove the power inverter from

the vehicle receptacle and/or the connection ter-

minals from the automotive battery after each

use and before every cleaning.

• Only connect the power inverter to the automotive

battery when the engine is switched off! The

possibility of injury exists from rotating parts!

• Check the device and all parts for visible damage.

The safety concept of the device can only function

properly when it is in perfect condition.

• The power inverter must always be easily accessible

so that, in case of emergency, it can be quickly

disconnected from the power supply system.

Risk of electrical shocks.

• Connect the power inverter only to a 12 V auto-

motive battery/vehicle receptacle. Connecting

the device to a 24 V supply could damage it.

• When connecting the power inverter via the 12 V

vehicle plug make sure that the polarity of the

vehicle plug matches the polarity of the in vehicle

receptacle. The vehicle socket must have an inter-

nal positive pole, that is to say that the positive pole

of a vehicle battery cannot be connected to the

chassis of the vehicle.

• Check before connecting the power inverter that

the vehicle receptacle is sufficiently secured. This

safeguard may not in any way be circumvented

or changed.

• Use the supplied connecting cable only.

• Arrange for defective plugs, connection terminals or

cable to be replaced at once by qualified techni-

cians or our Customer Service Department.

• Get customer service to repair or replace connecting

cables and/or devices that are not functioning

properly or have been damaged.

• You may not open the casing or repair the device

yourself. Should you do so, the safety of the

device may be compromised and the warranty

becomes void.

• NEVER submerse the device in water.

Wipe it only with a slightly damp cloth.

This device suitable only for use indoors.

IB_61167_TSW300A1_GB_LB3.qxd 17.01.2011 14:04 Uhr Seite 2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tronic TSW 300 A1 IAN 61667 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tronic TSW 300 A1 IAN 61667

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info