Bedienungsanleitung Trotec AirgoClean 10E (Seite 6 von 10) (Englisch)

689437

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

5 EN

Operating manual – air cleaner AirgoClean 10 E

Operation

Notice

Avoid open doors and windows.

After being switched on, the device operates fully automatically.

Operating elements

No. Designation

1 On/off switch

Switching the device on / selecting the fan speed

Once you have completely installed the device as described in

the Start-up chapter, you can switch it on.

1. Set the on/off switch(1) to the desired fan stage.

Stage I = low fan speed

Stage II = medium fan speed

Stage III = high fan speed

ð The device is switched on.

Ionization

With this function, the room air is not only cleaned by means of

the HEPA filter, but additionally by means of ions. The released

ions remove pollen, dust, viruses and bacteria from the room

air.

Ionization starts automatically once you switch on the device.

Ionization cannot be switched off.

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Set the on/off switch(1) to 0.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Available accessories

Warning

Only use accessories and additional equipment

specified in the operating manual.

Using insertion tools or accessories other than those

specified in the operating manual may cause a risk of

injury.

Designation Article number

HEPA filter, filter class H11 7.160.000.510

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

The device does not start:

• Check the power connection.

• Check the power cable and mains plug for damages.

• Check the on-site fusing.

• Wait for 10minutes before restarting the device. If the

device is not starting, have the electrics checked by a

specialist company or by Trotec.

The device is loud or vibrates:

• Check whether the device is set up in a stable and upright

position.

The device works with reduced capacity:

• Check the HEPA filter for dirt. If necessary, clean or replace

the HEPA filter.

• The air outlet is obstructed. Make sure that the air outlet is

not blocked. Remove any loose objects from the air outlet.

• The HEPA filter's plastic cover was not removed before

installation. Take the HEPA filter out of the plastic cover.

The device works with no capacity or the air quality does

not improve:

• Check whether any windows and/or doors of the room are

open. If so, close them.

• The HEPA filter is not installed. Install the HEPA filter.

• Check the minimum distance to walls or other objects.

Position the device a little more in the room's centre if

required.

The device gives off an unpleasant odour:

• Check the HEPA filter for dirt. If necessary, clean or replace

the HEPA filter.

• Smoke, e.g. dense tobacco smoke, may produce odours

and contaminations in the air. Ventilate the room.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec AirgoClean 10E Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec AirgoClean 10E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info