Bedienungsanleitung Trotec BB30 (Seite 14 von 18) (Englisch)

756392

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

14 EN

layer thickness measuring device BB30

Starting the PC software

1. Enable the Bluetooth function of the measuring device.

2. Connect the supplied BLEadapter to your computer using

a free USBport.

3. Start the PC software.

4. Click on the Discovery button(23).

ðThe software starts the search for the device.

ðOnce the software has found the device, the device

name is displayed in the corresponding column Device

Name(28).

5. Select the device name and click on the Connect

button(27).

ðThe software connects to the device.

ðA Bluetooth icon(29) appears in the Real time

connection display(20) if the connection was

established successfully.

ðYou can now download data from the device or with

each measurement directly load values to the software

in real time and later save the entire dataset on your PC

(see Saving measured values (export)). With the

so-called live measurement the number of measured

values per group is not limited to50.

Retrieving measured values (download)

By use of the software you can download the measured values

from the device. You can choose which groups to download.

If you perform a measurement within the PC's reception range,

the stored measured values will directly be transferred to the

software.

üThe device has been connected to the software as

described in Starting the PC software.

1. Select the groups you want to download by choosing the

group numbers (from... to... ) from the two drop-down

menus under(18). As with the device the value range here

too is1 to50.

2. Click on the Read button(19).

ðData is being loaded.

3. A progress bar appears beside the drop-down box Data

filtering(22). The loading process is completed, when the

bar is filled. If the loading process cannot be completed

successfully, an error message will be displayed instead.

In that event check the Bluetooth connection between

device and PC. If in doubt, disconnect and then re-

establish the connection. Proceed as described in Starting

the PC software and then try to load the desired data

again.

4. Select a group from the drop-down box Data filtering(22)

to display the measured values.

ðThe measured values are displayed in the table below

the drop-down box Data filtering(22).

ðWhen clicking on a measured value in the table, further

information will be indicated under Statistics(21).

Saving measured values (export)

You can export a selected group as Excel file and save it on your

PC. There the table looks as it does in the software.

1. Select the File menu tab(25).

2. Select the submenu Save as.

3. Select the storage location and insert the desired file

name.

4. Then click on Save.

ðThe measured values from the selected group are

stored in the Excel table.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BB30 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BB30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info