Bedienungsanleitung Trotec BB30 (Seite 17 von 18) (Englisch)

756392

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

EN 17

layer thickness measuring device BB30

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

The device does not switch on:

• Check the charging status of the batteries. Change the

batteries, if required.

• Check that the batteries are properly positioned. Check the

polarity is correct.

• Never carry out an electrical check yourself; instead,

contact your Trotec customer service.

Table of faults

The following error codes can be displayed:

Error code Cause of error

Err1 Measuring mode FE: Layer thickness outside the

measuring range

Err2 Measuring mode NFE: Layer thickness outside

the measuring range

Err3 Measuring mode AUTO: Layer thickness outside

the measuring range

Err4 Measuring mode FE: No FE data could be

detected.

Err5 Measuring mode NFE: No NFE data could be

detected.

Maintenance and repair

Battery change

A battery change is required, when the Battery indication(11)

lights up or the device can no longer be switched on. See

chapter Operation.

Cleaning

Clean the device with a soft, damp and lint-free cloth. Make

sure that no moisture enters the housing. Do not use any

sprays, solvents, alcohol-based cleaning agents or abrasive

cleaners, but only clean water to moisten the cloth.

Repair

Do not modify the device or install any spare parts. For repairs

or device testing, contact the manufacturer.

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment

must not be disposed of with the household waste at the end of

its life. You will find collection points for free return of waste

electrical and electronic equipment in your vicinity. The

addresses can be obtained from your municipality or local

administration. You can also find out about other return options

that apply for many EU countries on the website

https://hub.trotec.com/?id=45090. Otherwise, please contact an

official recycling centre for electronic and electrical equipment

authorised for your country.

The separate collection of waste electrical and electronic

equipment aims to enable the re-use, recycling and other forms

of recovery of waste equipment as well as to prevent negative

effects for the environment and human health caused by the

disposal of hazardous substances potentially contained in the

equipment.

You are responsible for deleting any personal data stored on the

waste equipment to be disposed of.

In the European Union, batteries and accumulators must not be

treated as domestic waste, but must be disposed of

professionally in accordance with Directive 2006/66/EC of the

European Parliament and of the Council of 6September 2006

on batteries and accumulators. Please dispose of batteries and

accumulators according to the relevant legal requirements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BB30 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BB30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info