Bedienungsanleitung Trotec BP21 (Seite 9 von 10) (Englisch)

756403

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

EN 9

pyrometer BP21

Example: Setting the degree of emission:

1. Press the Mode key(3) once.

ðExtended setting mode will be started.

ðThe Degree of emission indication (13) flashes.

2. Adjust the degree of emission by increasing the value

using the laser button(4) or by decreasing it using the

lamp button(2).

ðThe value range is between1.00 and0.10.

3. Press the measurement button(6) to confirm the selected

settings.

ðThe settings are saved and you will exit the extended

setting mode.

Switching the device off

• With activated HOLD indication(18) the device switches off

automatically after approx. 8seconds.

• By pressing the measurement button(6), continuous

measurement can be deactivated. The devices switches

over to the HOLD(18) indication and will switch off

automatically after approx.8seconds.

Maintenance and repair

Battery change

A battery change is required when a battery indication(11)

lights up on the display(1) or the device can no longer be

switched on. See chapter Operation.

Cleaning

Clean the device with a soft, damp and lint-free cloth. Make

sure that no moisture enters the housing. Do not use any

sprays, solvents, alcohol-based cleaning agents or abrasive

cleaners, but only clean water to moisten the cloth.

Repair

Do not modify the device or install any spare parts. For repairs

or device testing, contact the manufacturer.

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

The device does not switch on:

• Check the charging status of the battery. Change the

battery, if required (see chapter Inserting the battery).

• Make sure that the battery is properly positioned. Check

the polarity is correct.

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment

must not be disposed of with the household waste at the end of

its life. You will find collection points for free return of waste

electrical and electronic equipment in your vicinity. The

addresses can be obtained from your municipality or local

administration. For further return options provided by us please

refer to our website https://de.trotec.com/shop/.

The separate collection of waste electrical and electronic

equipment aims to enable the re-use, recycling and other forms

of recovery of waste equipment as well as to prevent negative

effects for the environment and human health caused by the

disposal of hazardous substances potentially contained in the

equipment.

In the European Union, batteries and accumulators must not be

treated as domestic waste, but must be disposed of

professionally in accordance with Directive 2006/66/EC of the

European Parliament and of the Council of 6September 2006

on batteries and accumulators. Please dispose of batteries and

accumulators according to the relevant legal requirements.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BP21 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BP21

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info