Bedienungsanleitung Trotec BP21WP (Seite 5 von 18) (Englisch)

756404

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

EN 5

pyrometer controlled via smartphone BP21WP

Information about the device

Device description

Used in combination with Trotec's MultiMeasure Mobile app the

pyrometer permits non-contact, infrared surface temperature

measurements. The pyrometer comes equipped with an on-

demand multi-point laser which does not serve for temperature

measurements but is instead used as aiming aid for the surface

to be measured.

In case of individual measurements, the measurement value

display can be refreshed both via the app and by a brief

actuation of the measurement button at the measuring device.

Apart from the hold function, the measuring device can indicate

minimum, maximum and average values and carry out series

measurements.

In the app you can specify MAX and MINalarm thresholds for all

parameters measured with the device.

In case of a matrix measurement the measured values can be

displayed two-dimensionally (XY-diagram) with a background

image or grid.

The measurement results can be displayed and saved on the

terminal device either numerically or in form of a chart. Then,

the measurement data can be sent in PDF or Excelformat.

The app also includes a report generation function, an organiser

function, one for customer management and further analysis

options. Moreover, it is possible to share measurements and

project data with colleagues in another subsidiary. If

MultiMeasure Studio Professional is installed on a PC, you can

even use report templates and ready-made text blocks for

various fields of application to turn the data into professional

reports.

Measuring spot

Observe the ratio of the distance(D) to the measuring spot

diameter(S). The larger the distance to the object, the larger the

measuring spot diameter and hence, the less precise the

measured result. The device calculates an average temperature

from all the temperatures in the measuring spot.

The sensor has a geometric resolution of10:1(D:S).

Emissivity

The degree of emission is used to describe the energy radiation

characteristics of a material.

A material's emissivity depends on various factors:

• Material composition

• Surface condition

• Temperature

Most organic materials have an emissivity of0.95. Metals or

shiny materials come with a much lower value. The sensor

operates with a fixed degree of emission of0.95. During the

measurement please bear in mind that highly reflective surfaces

(e.g. metal, glass, ceramics) can falsify the measurement result.

Info

If you simultaneously use a thermohygrometer

BC21WP that is also connected to the app, you can

now adopt the dew point determined with it as alarm

threshold for the pyrometer BP21WP so as to obtain

the functionality of a dew point scanner. An acoustic

alarm signal generated by the app will be emitted by

the terminal device when the measured temperature

values reach or fall below the dew point.

Device depiction

BP21WP

No. Designation

1 Measuring sensor

2 LED

3On/ off/ measurement button

4 Battery compartment with cover

5 Lock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BP21WP Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BP21WP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info