Bedienungsanleitung Trotec BZ30 (Seite 7 von 12) (Englisch)

795067

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EN 7

CO₂ air quality data logger BZ30

Adjusting the limit values for the feel-good indication

Note:

This setting can only be adjusted in the setting mode for the

alarm threshold! After having set an alarm threshold, do not

press the ESCbutton but rather the ALARMbutton again for a

brief moment. The lower limit value for the feel-good indication

will be displayed and the icons of the feel-good indication

  start to flash.

1. Press or to increase or reduce the lower limit

value for the feel-good indication.

2. Press the ALARMbutton to switch over to setting the upper

limit value.

3. Press or to increase or reduce the upper limit

value for the feel-good indication.

4. Press the ESCbutton to exit the mode and to adopt the set

value.

Displaying the minimum/ maximum value

The device saves the highest and lowest display values. To call

up these values, please proceed as follows:

1. Press the MAXMINbutton.

ðMAX appears on the display and the highest measured

values for carbon dioxide, temperature and relative

humidity will be displayed as well.

2. Press the button again to view the minimum values (MIN).

3. Press the ESCbutton to exit this mode.

Background illumination

The background illumination will be switched on in addition by

pressing either ALARM, MAXMIN, or . The background

illumination goes out after approx. 20seconds of non-use.

Press the ESCbutton to exit this mode.

Setting the °C/°Findication

Press the °C/°Fbutton at the rear of the device to switch

between an indication in degrees Celsius and degrees

Fahrenheit.

Starting a recording

Press and hold the RECbutton at the rear of the device for

approx. 5seconds to record the measured values.

Note:

If you want to start a new recording, you first have to save or

delete measured values already saved on the device. For more

detailed information please refer to the “Using the software”

section.

Using the software

There is a multi-data logger software included in the scope of

delivery. You can use it to read and process measuring device

data when the device is connected to a computer or notebook.

Data can be graphically displayed directly in the software or

visualised in an Excel sheet or similar programme. The main

functions are all included in the main window.

Required operating system:

Windows2000/ WindowsXP/ Vista/ Windows7/ Windows8/

Windows10

Minimum hardware requirements:

PC or notebook with Pentium 90MHz or higher, 32MB RAM; at

least 7MB of free hard disk space for the installation of the

multi-data logger software. Recommended screen resolution:

1280x1024 with high colour resolution (32bit).

Establishing communication

1. Use the supplied cable to connect the logger to the

USBinterface of your PC. Several loggers can be

connected to one PC at the same time.

2. Run the multi-data logger software.

3. When the connection has been established successfully,

the respective icon for the logger is displayed in the

Instrumentfield.

Importing recorded data

Info

Prior to readout, the recording mode must be

terminated (RECbutton on the device)! To do so, follow

the instructions in the software.

There are two options to import recorded data from the logger:

1. Select the logger icon in the Instrument field. Right-click

your mouse to open a dialog box. There, select the Read

data logger data menu item to import the data.

2. Alternatively, you can click on the icon in the toolbar to

read data recorded by the logger.

ðAfter the measured values have been successfully

transferred, the data graph window opens. The graph

shows three channels: CO2 (red), temperature (green)

and relative humidity (blue).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec BZ30 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec BZ30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info