Bedienungsanleitung Trotec DH 95 S (Seite 24 von 64) (Deutsch, Englisch, Französisch, Türkisch)

580108

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

B - 9 Operating manual – Condenser dryer DH 95 S GB

The accurate functionality of the device was tested

during production a number of times. However, if

functionality faults do occur, then check the device

according to the following list.

The device does not start:

• Check the mains power (230 V/1~/50 Hz).

• Check the mains plug for damages.

• If the fault indicator for the condensation pump

lights up or a beep is emitted, have the error re-

paired by a specialist company for cooling and air-

conditioning or by TROTEC

• Have the electrics checked by a specialist compa-

ny for cooling and air-conditioning or by TROTEC

The device runs but forms no condensation:

• Check the condensation drain hose is positioned

correctly.

• Check that the condensation pump functions prop-

erly. Check for abnormal vibrations and sounds.

Remove external dirt.

• Check the room temperature. Check the device's

permissible working range complies with the tech-

nical data.

• Ensure that the relative humidity complies with the

technical data.

• Check that the selected humidity is realistic. The

humidity in the room must be above the selected

range. Reduce the selected humidity by pressing

the "Arrow down" button (15), if necessary.

• Check the air filter is not dirty. If necessary, clean

or replace the air filter.

• From the outside, check the condenser and the

condensation pump are not dirty (see chapter

"Maintenance"). If the inside of the device is dirty,

have it cleaned by a specialist company for cooling

and air-conditioning or by TROTEC

The device is loud or vibrates; condensation leaks:

• Check whether the device is standing upright and

on an even surface.

The device gets very warm, is loud or is losing

performance:

• Check the air inlets and air filter are not dirty. Re-

move external dirt.

• Check the inside of the device and especially the

fan, the fan housing, the evaporator, the

condenser and the condensation pump for

external dirt (see "Maintenance" chapter). If the

inside of the device is dirty, have it cleaned by a

specialist company for cooling and air-

conditioning or by TROTEC

Possible error numbers

Does your device still not operate correctly after

these checks? Is there an error number shown in

the display for your device?

Bring the device to a specialist company for cooling

and air-conditioning or to TROTEC

for repairs.

Errors and faults

Error numbers Meaning

E1 There is not enough refrigerant available.

E2 The temperature sensor reports an error.

E3 The sensor for measuring the humidity reports

an error.

E4 The refrigerant flow line sensor reports an error.

E5 The sensor for measuring electric current reports

an error (rotating field).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec DH 95 S Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info