Bedienungsanleitung Trotec HyStream 2100 (Seite 5 von 16) (Englisch)

753329

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

EN 4

Operating manual – heat gun HyStream 2100

General Power Tool Safety Warnings – Power tool

use and care

•Do not force the power tool. Use the correct power tool

for your application. The correct power tool will do the

job better and safer at the rate for which it was designed.

•Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

•Disconnect the plug from the power source and / or

the battery pack from the power tool before making

any adjustments, changing accessories, or storing

power tools. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

•Store idle power tools out of the reach of children and

do not allow persons unfamiliar with the power tool or

these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

•Maintain power tools. Check for misalignment or

binding of moving parts, breakage of parts and any

other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

•Use the power tool, accessories and tool bits etc. in

accordance with these instructions, taking into

account the working conditions and the work to be

performed. Use of the power tool for operations different

from those intended could result in a hazardous situation.

General Power Tool Safety Warnings – Service

•Have your power tool serviced by a qualified repair

person using only identical replacement parts. This will

ensure that the safety of the power tool is maintained.

Device-specific safety warnings for heat guns

• Negligent handling of the device may result in a fire.

– Proceed with caution when using the power tool near

combustible materials.

– Do not point the device at the same spot over a longer

period of time.

– Do not use the device in a potentially explosive

atmosphere.

– The heat can reach combustible materials which are

covered.

– After use put down the power tool in an upright position

on the provided stand with the air outlet pointing

upward.

– Do not leave the power tool unattended while in

operation.

• Do not look directly into the nozzle opening at the air

outlet.

• Never direct the hot air current at people or animals.

• Never direct the hot air directly at a window or other glass

surfaces.

• Never obstruct the hot air current by blocking or covering

the air outlet.

• Do not use the power tool in wet surroundings or in areas

with an increased humidity level.

• Do not use the suspension eye on the power cable as

transport aid.

• Keep a sufficient distance between the air outlet and the

workpiece or the surface to be processed. An

accumulation of air can lead to overheating of the power

tool.

• Allow the power tool to cool down sufficiently before

storing it away. The power tool, especially the air outlet, is

still very hot and can thus cause damage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec HyStream 2100 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec HyStream 2100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info